User manual SONY FA-HS1AM

[. . . ] the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. [. . . ] Depending on the external device, you cannot attach it to this unit. Competitor flashes are not recommended because they are not compatible with the flash system. Battery power of this unit is depleted by pressing the shutter button of the camera. 5 After use, turn off this unit's power and Then remove this unit by sliding it in the direction of arrow as illustrated while pressing the release button. Use a button type 3V lithium battery (CR1220) with this unit. Turn off the power of this unit when replacing the battery. For any service or guarantee matters please refer to the addresses given in separate service or guarantee documents. 2 Insert a flat-tipped insulator into the space Between the battery and adaptor body as illustrated. notes Do not insert your fingernail because you can be injured. Do not insert an object that it is thicker than the space because you can damage the unit. Depending on the time elapsed since manufacture of the batteries, their life may vary from the values described in this operating instructions, even if this unit is provided with new batteries. Allow the battery to return to normal room temperature to restore the battery to its normal charge. Your finger not to pop out and press the battery with a flat-tipped insulator in the direction of the arrow to remove the battery. Be careful not to pop out the battery when removing it. [. . . ] Use of another battery may present a risk of fire or explosion. For details about this unit and digital single reflex camera compatibility, refer to the following URL. [. . . ]