User manual SONY FA-SHC1AM

[. . . ] If you use a white card, the light level will exceed the measurable light level. "Custom WB error" will appear on the LCD screen of the camera. If this message appears, it means that there is unexpected value (when flashing close to the object or exposing to a colorful object). It is recommended that you set the white balance again to get a more correct white balance value. [. . . ] To reduce fire or shock hazard, do not expose the unit to rain or moisture. When the lithium battery becomes weak, replace the battery with a Sony CR1220 lithium battery. Use of another battery may present a risk of fire or explosion. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9. Disposal of Old Electrical & Electronic Equipment (Applicable in the European Union and other European countries with separate collection systems) This symbol on the product or on its packaging indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. Do not insert an object that it is thicker than the space because you can damage the unit. If it comes in contact with water, wipe it dry with a clean cloth and take it to the nearest Sony dealer immediately. Take it to the nearest Sony dealer immediately for repair. When dirty, this unit may be cleaned with a clean, dry cloth. Do not allow this unit to come in contact with alcohol or other chemicals. Never leave this unit where it may be subjected to extreme temperatures, such as the glove compartment of a car, or to high humidity. Do not touch the sync terminal while connecting to the flash. Not to pop out it as illustrated and press the battery with the regular screwdriver to the direction of the arrow to remove the battery. Be careful not to pop out the battery when removing it. [. . . ] Be careful not to pop out the battery when removing it. 5 Slide the battery-chamber cover in the direction of arrow until it clicks to secure the cover in place. 60 V or less Compatible with center-positive and center negative polarities Battery Button type 3V lithium battery (CR1220) Battery life Approx. 8 oz) Operating temperature 0 °C to +40 °C (+32 °F to +104 °F) Storage temperature -20 °C to +60 °C (-4 °F to +140 °F) Included items Sync terminal adaptor FA-SHC1AM (1) (A button type 3V lithium battery (CR1220) installed) Set of printed documentation Design and specifications are subject to change without notice. [. . . ]