User manual SONY FA-WRR1

[. . . ] ????????? Changing the group You can choose how to set the group by switching the status of the REMOTE lamp ?. When you press and hold the GROUP button ?When the REMOTE lamp is lit You can change the group of this product by selecting MENU button ?[RECEIVER SET] on the Wireless Radio Commander (sold separately). [. . . ] ): 15hours (when using alkaline batteries) Recommended batteries: Two LR6 (AA-sized) alkaline batteries Two AA-sized rechargeable nickel-metal hydride batteries Included items: Wireless Radio Receiver (1), Pouch (1), Shoe cap (1), Set of printed documentation Functions described in these operating instructions are based on testing conditions at Sony. Design and specifications are subject to change without notice. ? ?????? English Before operating the product, please read this manual thoroughly and retain it for future reference. Before use This product can be used in combination with Sony Flashes that are compatible with the Multi Interface Shoe. Some functions may not be available depending on the model of the flash you use. Refer to the Sony website for your region for details on this product?s compatibility with your flash. Along with this manual, refer to the operating instructions of your flash and the Wireless Radio Commander. This product is designed to be dust and moistureresistant, but is not waterproof or splash-proof. When you use the product in rainy conditions, do not let the product get wet. Locations to avoid Regardless of whether this product is in use or in storage, do not place it in any of the following locations. ? In extremely hot locations In locations such as a car parked in the sun, the product may become deformed resulting in a malfunction. ? Under direct sunlight or near a heater The product may become deformed resulting in a malfunction. ? In locations with excessive vibration ? Near strong magnetic fields ? In sandy or dusty areas such as on the beach Be careful not to let sand or dust get inside the product when using it on the beach or other sandy areas. Flash sync terminals ? Flashes that have a sync terminal with reversed polarity can be used with this product. ? Use flashes with a sync voltage of 400V or lower. ? Turn off the flash connected to the sync cord when you connect the sync cord to the (flash sync) terminal. Otherwise, the flash may emit light when the sync cord is connected. Communication distance The communication distance between this product and the Wireless Radio Commander (sold separately) is approximately 30m (98. ? The distance given above applies under conditions where there are no obstacles, shielding, or radio wave interferences. ? The communication distance may be shorter depending on the positioning of the products, the ambient environment, and weather conditions. WARNING To reduce fire or shock hazard, do not expose the unit to rain or moisture. CAUTION ? Replace the battery with the specified type only. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ]