User manual SONY FH-B610

[. . . ] • Check the model name on the bottom of your camera. Checking the supplied items The number in parentheses indicates the number of pieces. • Camera (1) • Rechargeable battery pack NP-BN (1) (This rechargeable battery pack cannot be used with Cyber-shot that are supplied with the NP-BN1 battery pack. ) • Micro USB cable (1) • AC Adaptor AC-UB10/UB10B/UB10C/UB10D (1) • Power cord (mains lead) (not supplied in the USA and Canada) (1) • Wrist strap (1) • Instruction Manual (this manual) (1) GB 2 Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call your Sony dealer regarding this product. [. . . ] Be sure not to drop the battery pack. Note • Never remove the memory card/battery pack when the access lamp (page 8) is lit. This may cause damage to data in the memory card/internal memory. GB 15 Setting the clock Power/Charge lamp (green) ON/OFF (Power) Control Wheel Select items: v/V/b/B Set the numeric value of date and time: / Set: z the 1 PressTime ON/OFF (Power) button. on the camera for the first Date & setting is displayed when you turn time. • It may take time for the power to turn on and allow operation. 2 Select a desired language. location 3 Select a desired geographic press z. by following the on-screen instructions, then & Time Format], [Daylight Savings] or 4 Set [Date Time] and [Date & Time], then select [OK] t [Summer [OK]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. 5 Select the desired display color, following the instructions on the screen. 6 When an [In-Camera Guide] introductory message is appeared on the screen, select [OK]. GB 16 Shooting still images/movies Shutter button MOVIE Mode switch : Still image : Movie Shooting still images W/T (Zoom) lever W: zoom out T: zoom in button halfway down to focus. 1 Press the shutterfocus, a beep sounds and the z indicator lights. When the image is in 2 Press the shutter button fully down to shoot an image. Shooting movies (Movie) button to 1 Press the MOVIElever to change the zoomstart recording. • Use the W/T (zoom) scale. • Press the shutter button to shoot still images while continuing to record the movie. 2 Press the MOVIE button again to stop recording. Note • The sound of the lens and lever operating will be recorded when the zoom function operates while shooting a movie. The sound of the MOVIE button operating may also be recorded when movie recording is finished. • Continuous shooting is possible for approximately 29 minutes at one time at the camera’s default settings and when the temperature is approximately 25°C (77°F). When [Toy camera] is selected in Picture Effect, sets the color hue. When [Partial Color] is selected in Picture Effect, selects the color to extract. GB 20 Watercolor Effect Illustration Effect EV ISO White Balance Underwater White Balance Focus Metering Mode Cont. Shooting Interval Scene Recognition Soft Skin Effect Smile Shutter Smile Detection Sensitivity Face Detection Anti Blink Movie SteadyShot In-Camera Guide When [Watercolor] is selected in Picture Effect, sets the effect level. When [Illustration] is selected in Picture Effect, sets the effect level. Adjust color tones when shooting underwater. Select the metering mode that sets which part of the subject to measure to determine the exposure. Select the number of images taken per second for Burst shooting. Set to automatically detect shooting conditions. Set the Soft Skin Effect and the effect level. Set to automatically release the shutter when a smile is detected. Set the Smile Shutter function sensitivity for detecting smiles. [. . . ] These dots are a normal result of the manufacturing process, and do not affect the recording. On camera’s temperature Your camera and battery may get hot due to continuous use, but it is not a malfunction. On the overheat protection Depending on the camera and battery temperature, you may be unable to record movies or the power may turn off automatically to protect the camera. A message will be displayed on the screen before the power turns off or you can no longer record movies. In this case, leave the power off and wait until the camera and battery temperature goes down. If you turn on the power without letting the camera and battery cool enough, the power may turn off again or you may be unable to record movies. GB 27 On charging the battery If you charge a battery that has not been used for a long time, you may be unable to charge it to the proper capacity. [. . . ]