User manual SONY FVP-1

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to this number whenever you call upon your Sony dealer regarding this product. [. . . ] When selecting the same image for all the split planes: 1 Press arrow button to move the white frame to the image you want to print, then press ENTER. (The blue frame appears inside the white frame. If you want to make other same image prints, repeat step 1 . When selecting the different images for each split plane: 1 Press the arrow button to move the white frame to the image you want to print, then press ENTER. (The blue frame appears inside the white frame. ) 2 Repeat step 1 to select images for the split planes in the desired order. Re-selecting the image Move the white frame to the image you want to cancel the selection for and press ENTER. the blue frame disappears and the selection is canceled. If you want to re-select the image after displaying the actual print image, press PICTURE to return to the thumbnail screen, then repeat step 2. re-selecting the type of the split Press PICTURE so that the thumbnail screen appears. Re-select the split type using the print mode dial. You can use the selected images, or change the selection. Note If you press PRINT when the actual print image is displayed, only the displayed image is printed. The pictures are placed from the upper left to the lower right on the sheet in order of the selection, not in order of the image list. You can also select an image from the different pages. If you select more images than the number of the split planes, the images are automatically placed on the next print. to check the actual print image Press CAPTURE. The actual print image with the white frame (for the same image split printing) or the blue frame (for the different images split printing ) appears in the center of the screen. When you select 4split printing using a same image When you select 4split printing using different images You can make prints divided into multiples of 1/2-, 1/ 4- or 1/16-size pictures. You can also select the same image, or different images for the split print. Before you begin 1 Turn on the printer and television and set the input selector of the television to "VIDEO. You can select 2-split, 4-split, 16-split planes of the same image or different images. [. . . ] Delete unnecessary images, or use a new floppy disk. Insert the disk on which images are recorded. If you cannot print, check the indicators on the front panel. Both the ribbon error and paper supply indicators flash. [. . . ]