User manual SONY FVP1

[. . . ] WARNING This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. [. . . ] Printing multiple images continuously You can print multiple images continuously up to 25 sheets using the optional Automatic Feeder VPF-A1. You can capture the input image from the video equipment connected to the VIDEO INPUT connector of the printer and print it in full-size (standard print). Turn on the printer and television and set the input selector of the television to "VIDEO. While the INPUT indicator lights up, the playback picture appears on the screen (input picture). Blur compensation When you set INPUT SELECT to "VIDEO MOTION, " the selected image appears on the screen and the horizontal red line moves from the top to the bottom on the left half of screen, then moves from the top to the bottom on the right half of screen. In this sequence, if there is motion blur on the image, the printer automatically compensates for the image (blur compensation). When the blur compensation ends, the screen darkens once and the print image appears in the screen. For details on playing back on the video equipment, refer to the instruction manual of your equipment. Press CAPTURE when the picture you want to print appears on the screen. The selected full-size image appears in the center of the screen, and the MEMORY indicator lights up. The paper supply indicator flashes while loading the print paper. 2-split printing using different images 2-split printing using the same image 4-split printing using the same image When selecting the same image for all the split planes: 1 Turn on the video equipment and start playback. 2 Press CAPTURE when the picture you want to print appears on the screen. The memory image is displayed in the split planes selected in the step 1. When selecting the different images for each split plane: 1 Turn on the video equipment and start playback. 2 Press CAPTURE when the picture you want to print appears on the screen. The memory image is displayed in the first plane of the split planes selected in the step 1. When you select "VIDEO MOTION" When you set INPUT SELECT to "VIDEO MOTION, " the selected image is blurcompensated in step 2. You can also press CAPTURE again while the MEMORY indicator is flashing to reselect the image. When you set to split printing with the same images, you can also press PICTURE to display the input picture, then reselect a new image. 4 Repeat steps 2 to 3 until you select images for all split planes. The selected pictures are allocated as follows: upper left n upper right n lower left n lower right. [. . . ] Format the floppy disk in the MS-DOS format (512 byte × 18 sector) using the Digital Mavica or your PC. DISK PROTECT m The write protect tab on the inserted floppy disk is set to the write protect position. Set it to the write enable position and then record the image. DISK FULL m There is not enough space to record the image. [. . . ]