User manual SONY FWD-50PX2/ST

[. . . ] 2-651-871-02 (1) FWD-50PX2/50PX2A Flat Panel Display JP Operating Instructions Mode d'emploi Bedienungsanleitung Manual de instrucciones Istruzioni per l'uso GB FR DE ES IT CS FWD-50PX2/50PX2A 2005 Sony Corporation WARNING Owner's Record The model and serial numbers are located on the rear. Record the model and serial numbers in the spaces provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Serial No. To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. [. . . ] No Sync INPUT1 DVI INPUT2 RGB INPUT2 Component Option1/2 Video There is no input signal. The signal mode of INPUT1 is set to digital RGB. The signal mode of INPUT2 is set to analog RGB. The signal mode of INPUT2 is set to component video. The signal mode of OPTION1 or OPTION2 slot is set to composite video. The signal mode of OPTION1 or OPTION2 slot is set to S video. The signal mode of OPTION1 or OPTION2 slot is set to analog RGB. Option1/2 S Video Option1/2 RGB Option1/2 Component The signal mode of OPTION1 or OPTION2 slot is set to component video. 24 (GB) Selecting Image Quality / Adjusting the Picture Selecting Image Quality You can set an image quality suitable for the type of picture or the brightness of the location where the unit is installed. Adjusting the Picture While watching the picture, you can adjust contrast, brightness, chroma, phase, and so on, to suit your taste. The adjustments can be carried out for each input signal separately. You can also store the adjusted levels in memory. Set the Picture Mode to any of "User1" to "User3. " 1 Press MENU. The main menu appears on the screen. PICTURE/SOUND CONTROL Picture Mode: Adjust Picture Adjust Sound Standard Adjusting the Contrast, Brightness, Chroma, and Phase, etc. Press MENU to show the main menu and adjust "Contrast, " "Brightness, " "Chroma, " "Phase, " "Sharpness, " "Noise Reduct. , " "Dynamic Picture, " "Color Temp. " or "Gamma Correct. " on the Adjust Picture menu. Select Set ENTER Exit MENU 2 Press M/m to move the cursor (yellow) to "PICTURE/SOUND CONTROL" and press ENTER. The PICTURE/SOUND CONTROL menu appears on the screen. PICTURE/SOUND CONTROL Picture Mode: Adjust Picture Adjust Sound Standard Contrast Select "Contrast" with M/m and press ENTER. Adjust the contrast with M/m/</, within the range of MIN (0) to MAX (100), then press ENTER. m/<: Decreases picture contrast. Brightness Select Set ENTER Exit MENU 3 Press M/m to move the cursor (yellow) to "Picture Mode" and press ENTER. The following menu appears on the screen. PICTURE/SOUND CONTROL Picture Mode: Adjust Picture Adjust Sound Vivid Standard User1 User2 User3 Select "Brightness" with M/m and press ENTER. Adjust the brightness with M/m/</, within the range of MIN (0) to MAX (100), then press ENTER. m/<: Makes the picture darker. Chroma Select "Chroma" with M/m and press ENTER. Adjust the chroma with M/m/</, within the range of MIN (0) to MAX (50), then press ENTER. m/<: Decreases color intensity. Select Set ENTER Exit MENU 4 Select the Picture Mode with M/m. Vivid: Pictures get intense sharpness with image contour and contrast maximized. Standard: Pictures look real with moderate contrast and image contour. User1-3: You can set the image quality to suit your taste using the Adjust Picture menu. [. . . ] To prevent the picture from moving, set the screen saver to "Off". Orbit", see "Changing the Image Position Automatically" on page 40 (GB). Turn off the power, and make sure that the air vents are not blocked, that there is ample space for air to flow around the display, and that the ventilation in the room is working properly. When the internal temperature returns to normal, the picture will display properly again. [. . . ]