User manual SONY FWD-40LX1 32LX1R

[. . . ] Communication Data Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . General Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] 1 2 3 4 5 6 7 8 9 Signal NC RD TD NC GND NC NC NC NC 4 5 6 * Check Sum: Sum total of 1 to 5. Lower one-byte data is validated when a value exceeds 255 (1 byte). FWD-40LX1 FWD-32LX1R 1 (c) Answer (Display Response to Host) 1 Answer at the time of Control request No. Item 1 2 Header Answer* Value 0x70: Answer 0x00: Completed (Normal completion) 0x01: Limit Over (Abnormal completion: Over upper limit) 0x02: Limit Under (Abnormal completion: Under lower limit) 0x03: Command Canceled (Abnormal completion) 3 Check Sum 0xXX 4 Error Answer No. Item 1 2 Header Answer* Value 0xE0:Answer 0x00: No Function Error 0x01: Check Sum Error 0x02: Data Length Error 3 Check Sum 0xXX * 0x00: Completed Packet is correctly received and process is also correctly completed. 0x01: Limit Over Packet is correctly received, but the data value is over the upper limit. 0x02: Limit Under Packet is correctly received, but the data value is under the lower limit. 0x03: Command Canceled Packet is correctly received, but the data value is not correct or the request cannot be accepted in the current host state. * Check Sum: If the value of a sum total of 1 and 2 exceeds 255 (1 byte), the data of 1 lower byte is effective. * 0x00: No Function Error Packet header, category and function code are not included in this protocol. 0x01: Check Sum Error Check sum value of received packet is not correct. 0x02: Data Length Error Packet is correctly received, but the data size is over the upper limit. * Check Sum: If the value of a sum total of 1 and 2 exceeds 255 (1 byte), the data of 1 lower byte is effective. 2 Answer at the time of Enquiry request (Normal completion) No. Item 1 2 3 4 : : X Header Answer Value 0x70: Answer 0x00: Completed Return Data Size 0xXX Return Data1 : : 0xXX 0xXX 0xXX Return Data (X-3) 0xXX 0xXX X+1 Check Sum * 0x00: Completed Completed packet is correctly received and process is also correctly completed. [. . . ] User Reset Syntax Control Header 0x8C Category 0x50 Function Code Table(5) Data1 0x02 Data2 0xFF Check Sum 0xXX Answer Control Header 0x70 0x70 Answer 0x00 0x03 Check Sum 0x70 0x73 Completed Command Canceled Code Table(5) Function 0x00 0x01 0x03 0x04 Picture Reset Audio Reset Picture Reset2 All Reset Contrast, Brightness, Chroma, Phase Range/Switch code Command Control Yes Enquiry No Standby Disable Power On Enable 18 FWD-40LX1 FWD-32LX1R The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of Sony Corporation. Le matériel contenu dans ce manuel consiste en informations qui sont la propriété de Sony Corporation. [. . . ]