User manual SONY GDM-17SE1/P

[. . . ] Dangerously high voltages are present inside the unit. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] These settings are stored in memory for all input signals. The SCREEN settings allow you to adjust the quality of the picture by controlling the moire and landing. The CANCEL MOIRE and MOIRE ADJUST settings are stored in memory for the current input signal. All other settings are stored in memory for all input signals. Then press the </, buttons to make the adjustment. Select To horizontally shift red or blue shadows vertically shift red or blue shadows TOP V CONVER TOP BOT V CONVER BOTTOM vertically shift red or blue shadows at the top of the screen vertically shift red or blue shadows at the bottom of the screen press the button again. Then press the </, buttons to make the adjustment. Select LANDING LANDING To reduce any color irregularities in the screen's top left corner to a minimum. Reduce any color irregularities in the screen's top right corner to a minimum. Reduce any color irregularities in the screen's bottom left corner to a minimum. Reduce any color irregularities in the screen's bottom right corner to a minimum. The monitor is automatically demagnetized (degaussed) when the power is turned on. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. The colors of most display monitors tend to gradually lose brilliance over several years of service. The COLOR RETURN feature found in the EASY and sRGB menus allows you to restore the color to the original factory quality levels. The explanation below explains how to restore the monitor's color from the EASY menu. The picture disappears while the color is being restored (about 2 seconds). After the color is restored, the picture reappears on the screen again. To protect adjustment data by locking the controls, first press the m/M buttons to select (CONTROL LOCK). If any other items are selected, the mark appears on the screen. To cancel the control lock Repeat the procedure above and set Before using this feature, the monitor must be in normal operation mode (green power indicator on) for at least 30 minutes. If the monitor goes into power saving mode, you must return the monitor to normal operation mode and wait for 30 minutes for the monitor to be ready. [. . . ] Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. In many countries, environmental labelling has become an established method for encouraging the adaptation of goods and services to the environment. The main problem, as far as computers and other electronics equipment are concerned, is that environmentally harmful substances are used both in the products and during their manufacture. [. . . ]