User manual SONY GDM-200PS

[. . . ] The model and serial numbers are located at the rear of the unit. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] For more information on using the OSD, see "Introducing the On-screen Display System" on page 9. Most adjustments are made using the MENU OSD. Once the setting is adjusted, it will be stored in memory for all input signals received. This MENU OSD contains links to the other OSDs described below. The brightness and contrast are both reset to the factory settings. Once the setting is adjusted, it will be stored in memory for the current input signal. The SIZE settings allow you to adjust the size of the picture. Once the setting is adjusted, it will be stored in memory for the current input signal. To move the picture left To move the picture up . To move the picture down The horizontal and vertical sizes are both reset to the factory settings. The horizontal and vertical centerings are both reset to the factory settings. Once the rotation is adjusted, it will be stored in memory for all input signals received. All other adjustments will be stored in memory for the current input signal. To move the picture sides to the right To move the picture sides to the left Adjust the picture rotation adjust the picture sides adjust the picture side balance adjust the picture width adjust the picture shape balance To move the top of the picture to the right To move the top of the picture to the left Once the setting is adjusted, it will be stored in memory for the current input signal. For example, you can change the colors of a picture on the screen to match the actual colors of the printed picture. Once the setting is adjusted, it will be stored in memory for all input signals received. The picture zoom adjustment will stop as soon as either the horizontal or vertical size reaches its maximum or minimum value. Adjust convergence settings to eliminate red or blue shadows that may appear around objects on the screen. Adjust the CANCEL MOIRE function to eliminate wavy or elliptical lines that may appear on the screen. Once CANCEL MOIRE is adjusted, it will be stored in memory for the current input signal. All other adjustments will be stored in memory for all input signals received. The "5000K, " "6500K" or "9300K" disappears and the new color settings are memorized for each of the three color modes. [. . . ] If you have another monitor close to this monitor, increase the distance between them to reduce the interference. For example, if it is facing South, turn it so that it is facing East. Move the monitor away from power lines or place a magnetic shield around it. Try plugging the monitor into a different AC outlet, preferably on a different circuit. [. . . ]