User manual SONY GDM-1605

[. . . ] Dangerously high voltages are present inside the set. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The monitor requires a video card or screen saver software which switches off one or both sync signals to activate the power saving function. Caution If no video signal is input to the monitor, or if the INPUT switch is set to the connector to which no signal is input when you turn on the monitor, the input signal warning indicator (page 18) appears. After 30 seconds, the Power Saving function automatically puts the monitor into the Active-off state and the POWER SAVING indicator lights up. Once the horizontal and vertical syncs are sensed, the monitor will automatically return to its Normal operation state. If there is something wrong with the input signal, one of the following messages appears when you turn the monitor off and on, or when you operate the INPUT switch. With the tilt-swivel, this unit can be adjusted to be viewed at the desired angle within 310° horizontally and 20° vertically. To turn the unit vertically and horizontally, hold it at its bottom with both hands as illustrated below. "NO CONNECTION" indicates that the supplied video signal cable is disconnected from the HD15 connector when the INPUT switch is set to "HD15. This function is to demagnetize the metal frame of the CRT to obtain a neutral field for uniform color reproduction. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. If the control lock function is set to on, set it to off on the OPTION OSD (page 16). In addition, its four factory preset color modes and user adjustable color modes give you unprecedented flexibility in matching on-screen colors to hard copy printouts. Furthermore, this monitor features digital control with OSD (On Screen Display). It delivers easier adjustment by visualizing your control statement. All together, it delivers incredible performance with the quality and support you can expect from Sony. Do not place the unit on surfaces (rugs, blankets, etc. ) or near materials (curtains, draperies) that may block the ventilation holes. Do not install the unit near heat sources such as radiators or air ducts, or in a place subject to direct sunlight, excessive dust, mechanical vibration or shock. Do not place the unit near equipment which generates magnetism, such as a converter or high voltage power lines. Warning on power connection Use the supplied power cord. For the customers in UK If you use the monitor in UK, please use the UK cable with UK plug (not supplied). Before disconnecting the power cord, wait for at least 30 seconds after turning off the power to allow the static electricity on the CRT display surface to discharge. [. . . ] Once the horizontal and vertical syncs are sensed, the monitor will automatically return to its Normal operation state. If there is something wrong with the input signal, one of the following messages appears when you turn the monitor off and on, or when you operate the INPUT switch. With the tilt-swivel, this unit can be adjusted to be viewed at the desired angle within 310° horizontally and 20° vertically. To turn the unit vertically and horizontally, hold it at its bottom with both hands as illustrated below. [. . . ]