User manual SONY GMD-616

[. . . ] â· Do not apply any excess shock or impact to the monitor and stand as damage may occur. When you install the monitor, be sure to: -- loosen the monitor cord a little to allow for seat adjustment, and fix the cord securely. [. . . ] -- prevent the monitor cord from getting tangled or crimped in the adjustable seat rail. Thank you for purchasing this Sony Headrest Monitor Kit. â· This kit is designed for use with the XVM-H65. â· You can mount this kit on the headrest of the left front seat of your car to enable viewing from the rear seats. If the seat shape is non-standard and obstructs the table arm, or it is difficult to view the monitor, adjust the angle of the table arm (4-5 C). Be sure that the shaft collar grips are facing in the correct direction. Pull out the headrest while holding down the tab. Refer to "Mounting to a headrest with close spacing between headrest shafts (6)" if the distance is shorter than A. If it is difficult to insert the shafts (4-4 A) Carefully loosen the 2 hex bolts in the base with the hex wrench 6. 6 Mount the kit by following after step 3 of "Mount the kit in your car (4), " using the 2 inner holes (not the outer holes) of the base. [. . . ] If it is difficult to insert the shafts (4-4 A) Carefully loosen the 2 hex bolts in the base with the hex wrench 6. 6 Mount the kit by following after step 3 of "Mount the kit in your car (4), " using the 2 inner holes (not the outer holes) of the base. [. . . ]