User manual SONY GO EXPLORE

[. . . ] User Manual English PLEASE READ BEFORE USING GO!EXPLORETM Please ensure that your PSPTM system has the correct date and time and time zone settings and system software version 3. 90 or higher. For further information on changing date and time settings or updating system software, please refer to the PSPTM system Instruction Manual. Your PSPTM system must be outdoors and stationary to locate your first position. Before using Go!ExploreTM for the first time, the GPS receiver will need to register its position. [. . . ] · To list all Places in a given category, press the F button to View All. The list of matching Places will be displayed. The map will be displayed with the details of the selected Place. · Press the A button to return to the list for selecting another Place, or press the S button to select Action and confirm the selection of the displayed Place. The route is automatically calculated, and you can start navigating. 4. 1. 5 SELECTING A DESTINATION WITH A SAVED PLACE SEARCH QUERY Search queries can be saved while searching for a Place. · With any of the lists of Place categories or subcategories displayed, press the F button to View All, then press the D button to Save Query. · Select one of the locations on the list. · Enter a name for the search query and press the D button to Save. Select Find & Go, then Places followed by Saved Searches. Select one of the saved queries and the list of matching Places will be displayed. The map will be displayed with the details of the selected Place. · Press the A button to return to the list and choose another Place, or press the S button to select Action and confirm selection of the displayed Place. and then press the S button to start navigating. 4. 1. 6 SELECTING A DESTINATION FROM HISTORY The destinations that you have set earlier are kept under History. Select Find & Go, followed by History. If necessary, scroll through the History pages and select the desired location from the list. The route is automatically calculated, and you can start navigating. 4. 1. 7 SELECTING A DESTINATION USING COORDINATES 1. Select Change Format to change the format of the displayed coordinates (optional). Enter the latitude in WGS84 format: use N/S to change the hemisphere. Enter the longitude in WGS84 format: use E/W to change the hemisphere. and press the S button to start navigating. 4. 1. 8 SELECTING HOME AS THE DESTINATION The most frequently used destination, for example, your main place of residence, should be saved as Home. If you have not set a Home address yet, Go!ExploreTM will ask you to define one if you choose Home from the Find & Go!The smart keyboard will be displayed: · Enter the Home address as you would when you search for an address, or select History to select a recently used location. [. . . ] This is the default orientation in 3D map view mode. 7 COPYRIGHT NOTICES Data Source © 2007 Tele Atlas N. V. Based upon: Topografische onderground Copyright © dienst voor het kadaster en de openbare registers, Apeldoorn 2007 © BEV, GZ 1368/2003. © Ordnance Survey of Northern Ireland. © Norwegian Mapping Authority, Public Roads Administration/© MMapsolutions. [. . . ]