User manual SONY GPS-CS1KA annexe 1

[. . . ] Printed on 70% recycled paper using VOC (Volatile Organic Compound)-free vegetable oil based ink. Before operating the unit, please read this manual thoroughly, and retain it for future reference. To reduce fire or shock hazard, do not expose the unit to rain or moisture. If you have any questions about this product, you may call: The number below is for the FCC related matters only. [. . . ] Error during tracking process This unit records position information every fifteen seconds. When you have a picture taken at any moment other than the moments when the unit records your position, the position information at that moment can be provided using the supplied software "GPS Image Tracker". A rough position can be calculated by measuring the distances between the locations before and after the picture is taken. In this case, the actual position may not match completely with the location on the map based on GPS information. On error due to incorrect clock setting on a camera When the clock setting on your camera is incorrect, you cannot apply the correct position information to the pictures. the position information is applied to the pictures based on the time information of the GPS log files and the time stamps of the pictures. So if the time stamps are incorrect, you cannot match the pictures with the GPS log files properly. adjust the clock setting of your camera properly. Refer to the operating instructions of your camera on how to set the clock settings. When you changed the clock setting of your camera abroad, etc. , modify the time stamp of the pictures to time setting of the GPS log using "Picture Motion Browser". Attach the supplied carabiner to the carabiner attachment loop of the unit in the following procedure. 1 Detach the attachment string from the main body of the Carabiner as illustrated below (1) and draw the string through the carabiner attachment loop of the unit (2). HR6 (size AA) Nickel-Metal Hydride battery (recommended for use at low temperatures) * When an LR6 (size AA) alkaline battery is used, the battery life is shorter at a low temperature. 2 Insert a battery into the unit with the + side of the battery Turn the power off and hold the unit with the battery cover up, then remove the battery. LR6 (size AA) Sony alkaline battery (not supplied) about 10 hours (When used at 25 °C (77 °F)) HR6 (size AA) Sony Nickel-Metal Hydride battery (not supplied) about 14 hours When you use the unit at low temperatures, we recommend you use a The battery duration may differ from the above depending on the Cautions If you mishandle the battery, there is a danger of leakage or explosion. ­ Insert a battery with the correct polarity +/­. ­ Remove the battery when you do not use the unit for a long time. Otherwise, it may result in leakage of the battery. Using the unit Record the GPS log using the GPS unit This unit can record your position and time (GPS log files) in the internal memory. When you turn on the power, tracking starts, and GPS log recording starts. The unit tracks the location automatically and records the position every fifteen seconds after tracking starts. [. . . ] It takes much time to receive radio signals from GPS satellites. It may take a long time to track the location depending on the positions (Power) button, but the unit is not turned on. There may be a bad contact between the battery cover and the battery. You may have used a battery with lower remaining power. [. . . ]