User manual SONY GPS-CS3KA

[. . . ] To reduce fire or shock hazard, do not expose the unit to rain or moisture. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] You do not need to apply positioning information to images that have already been matched with GPS Image Tracker is compatible with files in the following file formats. 1 or later) ­ Movie files taken with a Sony digital still camera or Sony digital video camera recorder ­ Sony RAW files (Program compatible with RAW files from the following camera models. You can confirm whether the movie file format is compatible with GPS Image Tracker by clicking [Help] t [About PMB] and click [Supported Formats] in the About PMB window of PMB. Using PMB, import the images to which you want to apply positioning information. PMB starts, and used If the window does not appear, double-click (PMB) on the computer screen. 4 Select images to which you want to apply positioning information using PMB. 1 Open the USB jack cover, and connect the GPS unit And your computer with the supplied USB cable. If the window does not appear, doubleclick (GPS Image Tracker) on the computer screen. 3 Confirm the device on the confirmation window, then click [OK]. The Windows Explorer screen shot of the contents of the removable disk may appear when the GPS unit is connected to your computer, be sure not to touch the data in the GPS folder. Before displaying GPS logs that you have newly imported from the GPS unit to GPS Image Tracker using Map View, be sure that you close GPS Image Tracker before starting Map View. The image files are saved and removed from the list. Positioning information is applied to the selected image, and then the image is saved and removed from the list. You cannot save images set to read-only. ] to save images, you cannot duplicate and save movie files. When the computer is connected to the Internet, the tracks recorded by the GPS logs will appear on the map of the main window. (Even if the computer is not connected to the Internet, the GPS logs are imported correctly. Step 3 Displaying the image on a map Viewing the image and the location where you recorded an image on a map/Viewing the route you traveled Using the "Map View" function of PMB, you can display the location where you recorded the image that has positioning information on a map. In addition, using the GPS unit as a GPS logger, you can display the route you traveled on a map. (If the computer has a memory card slot, you may insert the "Memory Stick Duo" media/SD memory card directly into the computer. ) PMB starts, and the window used to import images appears. If the window does not appear, double-click (PMB) on the computer screen. [. . . ] Notes on using "Memory Stick Duo" media/SD memory cards Make sure that you insert "Memory Stick Duo" media/SD memory cards into the "Memory Stick Duo" media/ SD memory card slot in the correct direction. When inserting "Memory Stick Duo" media/SD memory cards, do not try to insert them forcibly as this could damage "Memory Stick Duo" media/ SD memory cards and/or the GPS unit. Do not insert any objects other than "Memory Stick Duo" media/SD memory cards into the "Memory Stick Duo" media/SD memory card slot. Do not remove "Memory Stick Duo" media/SD memory cards or turn off the GPS unit while the GPS unit is reading, writing, or accessing data. [. . . ]