User manual SONY GV-D300

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. [. . . ] (4)Make sure the title is the one you want to erase, then press control dial again. Note If you use a cassette tape set to prevent accidental erasure, you cannot erase the title. Slide the protect tab so that the red portion is not visible. If you use a tape with cassette memory, you can make one title of up to 20 characters and store it in memory. (3)Turn the control dial to select the column of the desired character, then press the control dial. (4)Turn the control dial to select the desired character, then press the control dial. In step 3, turn the control dial to select [ M ] then press control dial. Para borrar un carácter To change the title you have made In step 2, turn the control dial to select the title which you want to change, then press the control dial. Erase characters one after another, then make the new title again. If you use a tape with cassette memory, you can label a cassette. the label can consist of up to 10 characters and is stored in cassette memory. When you insert the labeled cassette and turn the power on, the label appears. (5)Turn the control dial to select the column of the desired character, then press the control dial. (6)Turn the control dial to select the desired character, then press the control dial. In step 5 turn the control dial to select [ M ], then press the control dial. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If the mark appears in step 4 The cassette memory is full. If you erase the title in the cassette, you can label it. if you have superimposed titles in the cassette When the label is displayed , up to 4 titles also appear. Note on "-----" displayed on the menu The "-----" indicates the number of characters you can select for the label. When the "-----" indicator has fewer than 10 spaces, the cassette memory is full. Note on the cassettes If you use a cassette tape set to prevent accidental erasure, you cannot label it. [. . . ] This function displays the VCR's condition with five digits (a combination of a letter and figures) on the TV screen. If this occurs, check the following code chart. M Remove the cassette and leave the VCR for at least 1 hour. You are using a battery pack that is not an "InfoLITHIUM" battery pack. [. . . ]