User manual SONY HAR-D1000MCREW

[. . . ] 4-237-495-11(2) M-crew for HAR-D1000 Operating Instructions 2001 Sony Corporation · Duplication of any or all of the contents of this software and instruction manual or lending of this software to third parties without the express permission of the copyright holder is strictly prohibited by copyright law. · Sony cannot be held liable in any way for monetary losses, lost profits or claims from third parties arising from the use of this software. · Should any manufacturing defects occur, Sony's responsibility shall be limited solely to replacing said defective merchandise. · This software is approved for use only with the specified equipment. [. . . ] Do not erase, move, or change its contents. · If the required driver and other items have already been installed, a dialog box for your confirmation will appear during the installation. Preparation Uninstalling the software When you no longer require M-crew for HAR-D1000, uninstall a software as follows: 1 2 3 4 5 Open the Control Panel. In the Start menu, point to "Settings" and click "Control Panel". Double-click the "Add/Remove Programs" icon. The "Add/Remove Programs Properties" dialog box appears. Select and click "M-crew for HAR-D1000" in the program list. Click "OK" (or "Yes") in the dialog box for confirming the deletion. Uninstaller is activated and the software selected in step 3 is deleted automatically. Note After uninstalling M-crew for HAR-D1000, the folders "Database" and "Jacket" created under the "M-crew for HAR-D1000" folder (usually C:\Program Files\M_crew for HAR_D1000) and their files still remain on the hard disk. Delete them manually, if there is no more need for them. 9 Connections Connecting your personal computer with the HAR-D1000 Use a USB cable to connect your personal computer with the HAR-D1000. HAR-D1000 To the computer's USB port Computer ? ? To the USB connector USB cable Make sure to connect the HAR-D1000 directly to your computer. Do not connect via a USB hub. With the plug correctly oriented, insert it fully into the connector. Notes · Be sure to install this software before connecting the HAR-D1000 to your computer. If not, this software may not function properly. · Be sure to log on through the administrator's account to install a software. (for Windows2000) · Make sure each plug is straight when you insert it. Inserting it at an angle may damage the connector parts. · Connect the USB connector directly to the computer's USB port with a USB cable. If you connect the two units via a USB hub, the computer may not be able to control the connected HAR-D1000. · In case of Windows2000/WindowsMe, if you turn off the HAR-D1000 with a USB cable connected, a warning message may appear in the display. · Some HAR-D1000 functions are not supported by M-crew for HAR-D1000 (e. g. , Synchro-Recording from a CD changer, etc. ). If Synchro-Recording from a CD changer is started on the HAR-D1000 while "M-crew for HAR-D1000" software is starting up, the software is automatically ended. · A single HAR-D1000 should be operated by a single computer loaded with the "M-crew for HAR-D1000" software. If you use the same HAR-D1000 with no more than one computer in which the software has been installed, HAR-D1000 data may not be properly read in. If this occurs, click the Reload button (refer to the Help). 10 Verifying the status of the installed device Be sure to check the status of the installed devices before you start up M-crew for HAR-D1000. [. . . ] If the "Topics Found" dialog box appears, select the appropriate topic and click "Display". Finding topics with a certain word or phrase 1 Click the "Search" tab in the above topic search dialog box. 2 Enter a word or phrase that is related to the desired topic, and then click "List Topics". The topics that are found appear in the "Select Topics to display:" list box. 3 Select the appropriate topic and click "Display". [. . . ]