User manual SONY HCD-101

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. US and foreign patents licensed from Dolby Laboratories Licensing Corporation. The following label is located inside the unit. [. . . ] The MD system lets you erase unwanted sound quickly and easily. Press =0 or )+ until the track number you want appears. "Complete" appears for a few seconds and the selected track and title are erased. When you erase a track during playback, the track following the erased track begins playing. You can erase a track simply by specifying its track number. When you erase a track, the total number of tracks on the MD decreases by one and all the tracks following the erased one are renumbered. Repeat steps 1 through 3 to erase more tracks. " appears when the track was recorded or edited on another deck and is record protected. To erase the track, press YES while "Erase!You can erase the disc name, all recorded tracks and their titles all at one time. By using the Divide (see page 43), Erase (see page 40), and Combine (see page 44) Functions, you can erase specific portions of a track. While the MD deck is in stop mode, press EDIT/NO repeatedly until "All Erase ?"Complete" appears for a few seconds and all recorded tracks and their titles are erased. By using the Move Function, you can change the order of any track on the disc. When you move tracks, the tracks are automatically renumbered. Press =0 or )+ until the new track position appears. If you move the track while playing, the moved track start playing. Press =0 or )+ until the track number you want to move appears. You can use this function to add track numbers to multiple tracks that are recorded as one track. This function also lets you mark track numbers after the recording ends. The total number of tracks increases by one and all the tracks following the divided ones are renumbered. Example: Dividing track 2 into tracks B and C. [. . . ] Remove the MD and leave the system turned on for several hours until the moisture evaporates. A stereo FM programme cannot be received in stereo. Name Full There is no more space to store track or disc titles. Rec Level Over A high-level signal was input during analog recording with VIDEO/PC input jack. [. . . ]