User manual SONY HCD-CP11

[. . . ] 4-227-681-11(1) Micro HiFi Component System Operating Instructions Owner's Record The model and serial numbers are located at the rear. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. CMT-CP11 Serial No. CMT-CP11 ©2000 Sony Corporation WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. [. . . ] After setting the order, you can also make a synchronized tape recording of the tracks (see page 22). 4 Press PLAY MODE. The selected track is programmed. "STEP" appears, followed by the number of the selection just programmed. 5 6 To program additional tracks, repeat steps 3 and 4. The tracks play in the order that they were programmed. 1 6 Z bB m X CD x To cancel Program Play x M z Press PLAY MODE repeatedly until "PGM" disappears. To Do this + ­ Add a track to the end Do steps 3 and 4 with of the program Program Play stopped. Erase the entire program Press CD x with Program Play stopped. Z u . m x > M Tips · The program you made remains in the system's memory until you turn off the system or remove the CD. After the program finishes, press CD u to play the program again. · When the total playing time of the programmed tracks exceeds 100 minutes, "- - . · If you try to program more than 24 tracks, "PGM FULL" appears in the display. 3 2, 4 1 2 3 Press CD. "CD" appears. Press PLAY MODE repeatedly until "PGM" appears. or CD > repeatedly until the desired track number appears. PGM 3 Selected track number 243 Total playing time 20 The Tape Deck Recording to a tape manually Do the procedure below to manually record from any source to a tape. For example, tracks from a CD, the radio, or from any of the connected components. This lets you record just the songs that you want from a CD. TAPE nN 1 2 Press TAPE EJECT Z and insert a recordable tape. Press the button of the source you want to record from. · CD: To record from the CD · TUNER: To record from the radio · MD/VIDEO: To record from optional component 1 Z bB m X TAPE x 3 4 Press REC z. The tape stands by for recording. " " and "B" (or "b") appear. The Tape Deck The CD Player/The Tape Deck x M z + ­ Press DIR MODE on the remote repeatedly to select " " to record on " one side of the tape, or " "or " to record on both sides. Press TAPE X. Recording starts. Z 5 x > M u . m 6 Start playing the source you want to record from. Press TAPE x. TAPE X. 2 5 3 DOLBY NR To Stop recording Pause recording 4 Tips · To record with the Dolby NR system on, press DOLBY NR on the remote before step 5. · To start recording on the side facing away from you, after doing step 3, press TAPE nN until " " changes to " ". 21 Recording your favorite CD tracks to a tape -- Program Edit With Program Edit function, you can select only the CD tracks that you want using the Program Play function, then record the programmed tracks to a tape using the CD Synchro Recording function. TAPE nN 1 2 3 4 5 Press CD EJECT Z and place a CD. Press CD EJECT Z again to close the disc tray. Press TAPE EJECT Z and insert a recordable tape. Press CD. "CD" appears. 4 11 13 3 Z bB m X Press PLAY MODE repeatedly until "PGM" appears. or CD > repeatedly until the desired track number appears. PGM TAPE x 6 x M z 3 + ­ 243 Total playing time Selected track number Z u . m x > M 7 8 Press PLAY MODE. [. . . ] · Do not bend or roll up the antenna. · The two wires comprising the FM antenna have been pulled further apart since the system was first purchased. · The AM antenna wire is detached from the stand. A stereo FM program cannot be received in stereo. [. . . ]