User manual SONY HCD-CZ1

[. . . ] H SOUND button 21, 24, 25 i OFF (Stop/Power off) button 8, 9, 26 j VOL buttons (+/­) 16 To turn up or down the volume. You cannot connect any optional CD/MD units at the same time. *3 When an optional CD/MD unit is connected. *4 Available only when optional CD unit with the MP3 file control function is connected, and MP3 file is played. [. . . ] Repeat steps 5 and 6 if you want to erase other names. The unit returns to normal CD play mode. If you press <, you can move back to the left. 3 Repeat steps 1 and 2 to enter the entire name. The unit returns to normal CD play mode. If you cannot find the Disc Memo you want to erase, try selecting a different CD unit in step 2. If you have already erased all of the Disc Memo, the unit returns to normal CD play mode in step 4. You can use this function for discs that have been assigned custom names*1 or for CD TEXT discs*2. *1 Locating a disc by its custom name: when you assign a name for a CD (page 12) or an MD. *2 Locating discs by the CD TEXT information: when you play a CD TEXT disc on a CD unit with the CD TEXT function. When tuning in stations while driving, use Best Tuning Memory to prevent accidents. By activating the Traffic Announcement (TA) and Traffic Programme (TP), you can automatically receive FM station broadcast traffic announcements as they occur. These settings function regardless of the current FM programme/source, CD/MD; the unit switches back to the original source when the bulletin is over. The unit will continue searching for stations available with TP if "NO TP" is indicated. When the AF function is on: this unit's factory setting restricts reception to a specific region, so you won't be switched to another regional station with a stronger frequency. If you leave this regional programme's reception area and would like to take advantage of the whole AF function, select "Regional· off" from the Menu (page 22). Note This function does not work in the United Kingdom and in some other areas. *4 Available only when optional CD unit with the MP3 file control function is connected, and an MP3 file is played. First, attach the appropriate label depending on how you want to mount the rotary commander. Change source (radio/CD/MD*1/AUX*2)/ Power on Change operation (radio band/CD unit/MD*1 unit) Attenuate sound Stop playback or radio reception/Power off Adjust the sound menu Change the display item*4 During playback of a CD containing MP3 Files*5 Push in and repeat rotating quickly to: Push in, then rotate and hold to: You cannot connect any optional CD/MD units at the same time. *3 If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for 2 seconds to turn off the clock indication after turning off the ignition. *4 When using the RDS function, you can press (DSPL) to show "PTY" in the display. [. . . ] Some CD-Rs/CD-RWs may not play due to its recording equipment or the disc condition. An optional power amplifier is connected and you are not using the built-in amplifier. The clock display disappears if you press (OFF) for 2 seconds (page 5). Remove the front panel and clean the connectors. [. . . ]