User manual SONY HCD-FR8 DAVFR8 INSTRUCTIONS (MODEL# OF ENTIRE HT SYSTEM)

[. . . ] These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ­ Reorient or relocate the receiving antenna (aerial). [. . . ] Press X/x repeatedly until "FM MODE" appears in the front panel display. The last received station is tuned in. Press PRESET + or ­ repeatedly to select the preset station. Each time you press the button, the system tunes in one preset station. Tip 3 4 Press or c. Press X/x to select "MONO. " · You can select the preset station number directly by pressing the number buttons. The default setting is underlined. · "STEREO": stereo reception. · "MONO": monaural reception. Tuner Functions 3 Adjust the volume by pressing VOLUME +/­. 5 6 Press . The setting is made. Press SYSTEM MENU. To turn off the radio Press "/1. The system menu turns off. To listen to non-preset radio stations Use manual or automatic tuning in Step 2. For manual tuning, press TUNING + or ­ repeatedly. For automatic tuning, press and hold TUNING + or ­. The automatic tuning stops automatically when the system receives the radio station. To stop the automatic tuning manually, press TUNING + or ­. Naming preset stations You can enter a name for preset stations. These names (for example, "XYZ") appear in the front panel display when a station is selected. Note that no more than one name can be entered for each preset station. 1 2 3 4 Press FUNCTION repeatedly until "TUNER FM" or "TUNER AM" appears in the front panel display. To listen to radio stations when you know the frequencies Use direct tuning in Step 2. The last received station is tuned in. Press PRESET + or ­ repeatedly to select the preset station you want to create an index name for. Press X/x repeatedly until "NAME IN" appears in the front panel display. 1 2 3 Press D. TUNING. Press the number buttons to select the frequencies. By connecting a DIGITAL MEDIA PORT adapter, you can enjoy sound from the connected component on the system. Available DIGITAL MEDIA PORT adapters vary in each area. For details on connecting the DIGITAL MEDIA PORT adapter, see "Connecting Other Components" (page 30). Note Note · Depending on the type of DIGITAL MEDIA PORT adapter (not supplied), you may be able to operate a connected component using either the buttons on the remote or the unit. The following illustration shows an example of buttons that can be used in this case. · Do not connect an adaptor other than the DIGITAL MEDIA PORT adapter. · Do not connect or disconnect the DIGITAL MEDIA PORT adapter to/from the unit while the system is turned on. · Depending on the type of DIGITAL MEDIA PORT adapter (not supplied), the images are also output. In this case, the system outputs the composite video signal only regardless of the type of video signal. . /> H x X Playing the connected component on the system 1 2 Press FUNCTION repeatedly until "DMPORT" appears in the front panel display. Start playback of the connected component. The sound and images from the connected component are played on the system or connected TV. For operation details, see the operating instructions of the DIGITAL MEDIA PORT adapter (not supplied). Tip · When listening to MP3 or other compressed music using a portable audio source, you can enhance the sound. Press SOUND FIELD repeatedly until "A. F. D. STD" appears in the front panel display. [. . . ] (26) B Lights up when the time information of a title or chapter appears in the front panel display. (DVD only) (47) C Lights up when the color system is set to NTSC. (Asian, Australian, and Middle Eastern models only) D Lights up when a station is received. (Radio only) (58) E Stereo/Monaural effect (Radio only) (59) F Lights up when the sleep timer is set. [. . . ]