User manual SONY HCD-H55 SERVICE MANUAL

[. . . ] This symbol is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. [. . . ] The delay time can be set in each surround mode (DOLBY, HALL, SIMULATED). * You can select the appropriate surround mode from among the following modes: DOLBY** (Dolby Surround): Expands sound to create theater-like sound effects. Note No sound will be heard from the rear speakers, unless the SURROUND ON/OFF button is set to ON. This section describes various ways to tune in AM and FM broadcasts. Before tuning, be sure to connect the supplied AM and FM antennas. When a station is received, the automatic tuning stops. Repeat step 3 until the desired station is received. "STEREO" appears when an FM stereo program of sufficient signal strength is received. , Canada and Mexico) or 9 kHz (for other countries) to match the frequency allocation system of your country. 4 Press SYSTEM POWER to turn the unit off. 5 While pressing DUAL MODE TUNING +, press SYSTEM POWER to turn the unit on. The recording level is automatically adjusted during recording. ⷠDo not operate deck A while recording with deck B. ⷠIt is not recommended recording with Metal tapes. To prevent accidental erasure To protect side A Break off the tab of side A. To record onto side A Cover the opening with plastic tape. This section describes recording from deck A to B. If the sound is affected by a television set during dubbing, turn off the set or move it away from the unit. Press § to open the cassette compartments, insert the tapes with the sides to be played or recorded facing you and close the cassette compartments. The unit enters recording pause mode for high speed dubbing, the P and r indicators light. (Dubbing can not be carried out by pressing the HIGH SPEED DUBBING button. This section describes continuous play with the CD section. [. . . ] Press REPEAT before or during playback. To repeat one track, press REPEAT so that "REPEAT 1" appears on the display. in program mode or shuffle mode: Only the "REPEAT" function is available. The entire program or all tracks shuffled in random order will be played repeatedly by pressing REPEAT. [. . . ]