User manual SONY HDR-CX220/L

[. . . ] Do not expose the appliance to naked flame sources (for example, lighted candles). To reduce the risk of fire or electric shock, do not expose this appliance to dripping or splashing, and do not place objects filled with liquids, such as vases, on the appliance. As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. [. . . ] If you use a Standard HDMI cable, 1080p, Deep Color, or 3D/4K images may not be displayed properly.  We recommend that you use an HDMI authorized cable or a Sony HDMI cable. Ώ We do not recommend using an HDMI-DVI conversion cable. Ώ Check the setup of the connected equipment if an image is poor or the sound does not come out of the equipment connected via the HDMI cable.  Audio signals (sampling frequency , bit length , etc. ) transmitted from an  20US HDMI jack may be suppressed by the connected equipment. Ώ Sound may be interrupted when the sampling frequency or the number of channels of audio output signals from the playback equipment is switched. Ώ When the connected equipment is not compatible with copyright protection technology (HDCP), the image and/or the sound from the HDMI TV OUT (ARC) jack may be distorted or may not be output. In this case, check the specification of the connected equipment. Ώ When “TV” is selected for the input source of the system, video signals via one of the HDMI IN jacks that was selected last time are output from the HDMI TV OUT (ARC) jack. Ώ To enjoy 3D images, connect a 3Dcompatible TV and video equipment (Blu-ray Disc player, “PlayStation®3, ” etc. 22US  Once a pairing operation is performed , it does not have to be performed again. However, you must repeat pairing in the cases listed below.  Pairing information is deleted by repairing the system. Έ Pairing for 10 or more devices is to be set. This system can set pairing with up to 9 devices. If pairing is to be set on a device after pairing has been set on 9 devices, the pairing information on a device whose connection date is the oldest is overwritten with new information. Έ The connection history with this system is deleted on the connected device. If pairing is not successful, redo the procedure from step 1. Ώ If you wish to pair with several BLUETOOTH devices, perform the procedure from steps 1 to 3 individually for each BLUETOOTH device. Ώ If no pairing information is stored in the system, the system automatically enters pairing mode when “BT AU” is selected as input. In this case, pairing mode is not released automatically. [. . . ]  Check the HDMI connection (page 14). ΅ Set up the Control for HDMI function on the TV. ΅ Make sure the connected equipment is compatible with “BRAVIA” Sync. ΅ Check the Control for HDMI settings on the connected equipment. [. . . ]