User manual SONY HDR-CX6EK

[. . . ] Even if the camcorder is turned off, the GPS function is working as long as the GPS switch is set to ON. Make sure that the GPS switch is set to OFF during take off and landing of an airplane (HDR-CX350VE/XR350VE). Menu items, LCD panel, and lens (software, including "PMB Help") Handbook (PDF) "Operating Guide" (1) See page 18 for the memory card you can use with this camcorder. Using the camcorder Do not hold the camcorder by the following parts, and also do not hold the camcorder by the jack covers. A menu item that is grayed out is not available under the current recording or playback conditions. The LCD screen is manufactured using extremely high-precision technology, so over 99. 99% of the pixels are operational for effective use. However, there may be some tiny black points and/or bright points (white, red, blue, or green in color) that appear constantly on the LCD screen. [. . . ] When you select [ONE PUSH], keep framing is flashing quickly. white objects while flashes slowly if [ONE PUSH] could not be set. keeps When [ONE PUSH] was selected, if , set [WHITE flashing after touching BAL. ] to [AUTO]. If you set [WHITE BAL. ], [SCENE SELECTION] is set to [AUTO]. WHITE BAL. (White balance) You can adjust the color balance to the brightness of the recording environment. Customizing your camcorder AUTO The white balance is adjusted automatically. OUTDOOR ( ) The white balance is appropriately adjusted for the following recording conditions: Outdoors Night views, neon signs and fireworks Sunrise or sunset Under daylight fluorescent lamps Tips If you have changed the battery pack while [AUTO] was selected, or taken your camcorder outdoors after inside use (or vice versa), aim your camcorder at a nearby white object for about 10 seconds for better color balance adjustment. When the white balance has been set with [ONE PUSH], if the lighting conditions changed by bringing your camcorder outdoors 6 GB from inside the house, or vice versa, you need to redo the [ONE PUSH] procedure to readjust the white balance. touch [AUTO]. SPOT MTR/FCS (Spot meter/ focus) You can adjust the brightness and focus for the selected subject simultaneously. This function enables you to use [SPOT METER] (p. 68) at the same time. Notes [EXPOSURE] is automatically set to [MANUAL]. SPOT FOCUS You can select and adjust the focal point to aim it at a subject not located at the center of the screen. Touch the subject in the frame of which you want to adjust the brightness and focus. To adjust the brightness and focus automatically, touch [AUTO]. Touch the subject in the frame of which you want to adjust the focus. To adjust the focus automatically, touch [AUTO]. Notes [EXPOSURE] and [FOCUS] are automatically set to [MANUAL]. Notes [FOCUS] is automatically set to [MANUAL]. EXPOSURE You can fix the brightness of a picture manually. Adjust the brightness when the subject is too bright or too dark. SPOT METER (Flexible spot meter) You can adjust and fix the exposure to the subject, so that it is recorded in suitable brightness even when there is strong contrast between the subject and the background, such as subjects in the spotlight on stage. Touch / to adjust the brightness. With [SELF-TIMER] set to [ON], press START/STOP to start countdown of the timer. The point when countdown reaches 0 is assumed as the moment of impact and motion before and after 0 is recorded. If camera shake is excessive, or there are moving objects in the background during recording, image analysis will not be performed effectively, and images may contain noise as a result. It is recommended that you record images under stable conditions (for example, using a tripod). Impact sound may be detected by the internal microphone even when an external microphone is attached. [TIMING] Select the recording start point after START/STOP is pressed. The default setting is [3sec AFTER]. The point when START/STOP is pressed. [3sec AFTER] [3sec BEFORE] Notes You cannot record sound. Image quality is not as good as that of normal recording. 0 GB SHOOTING SET (Items for customized shooting) See "Using menus" (p. The default settings are marked with . STEADYSHOT You can compensate for camera shake. Set [ STEADYSHOT] to [OFF] ( ) when using a tripod (sold separately), then the image becomes natural. ACTIVE Provides a more powerful SteadyShot effect. / See page 25. SET REC MODE (Recording mode) See page 25. STANDARD Provides the SteadyShot effect under relatively stable recording conditions. OFF ( ) GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical. Does not display the guide frame. The SteadyShot function is not used. [. . . ] When an external microphone (sold separately) is connected, it takes precedence over the built-in microphone. HDR-CX300E/CX305E/CX350E/ CX350VE/CX370E HDR-XR350E/XR350VE Lens (G lens) Flash Camera recording lamp (84) The camera recording lamp lights up in red during recording. The lamp flashes when the remaining recording media capacity or battery power is low. Remote sensor/Infrared port Point the Wireless Remote Commander (p. 115) towards the remote sensor to operate your camcorder. [. . . ]