User manual SONY HANDYCAM HDR-CX700V

[. . . ] Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. Do not expose batteries or apparatus with battery-installed to excessive heat such as sunshine, fire or the like. Notice for the customer in the countries applying EU Directives. The manufacturer of this product is Sony Corporation, 1-7-1 Konan Minato-ku, Tokyo, 108-0075 Japan. [. . . ] If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority. SleepTimer: You can fall asleep to music. This function works even if the clock is not set. 4 Set the time to start playing. Press / repeatedly to set the hour, and then press ENTER . Use the procedure above to set the minutes. 5 6 Use the same procedure as in step 4 to set the time to stop playing. Other Operations Press SLEEP repeatedly. If you select "AUTO, " the system automatically turns off after the current disc, tape or USB device stops or in 100 minutes. If the tape deck is still playing or recording at the set time, the system turns off after the tape deck stops. PlayTimer: You can wake up to CD, tuner or optional USB device at a preset time. Use buttons on the remote to control the Play Timer. Make sure you have set the clock. Select the sound source. Press / repeatedly until the desired sound source appears, and then press ENTER . The display shows the timer settings. 7 Press / to turn off the system. The system turns on 15 seconds before the preset time. Press PLAY MODE repeatedly until both "PGM" and "SHUF" disappear to return to normal play. General Soundcomesfromonechannel, ortheleftandrightvolumesare unbalanced. Place the speakers as symmetrically as possible. Connect only the supplied speakers. GB Startingplaybacktakesmoretime thanusual. The following discs take a longer time to start playback. a disc recorded with a complicated tree structure. a disc that has not been finalized (a disc to which data can be added). a disc that has many folders. "OVERCURRENT"appears. A problem has been detected with the level of electrical current from the (USB) port . Turn off the system and remove the USB device from the (USB) port . Make sure there is no problem with the USB device. If this display pattern persists, contact your nearest Sony dealer. [. . . ] In this situation, remove the disc, and leave the system turned on for about an hour until the moisture evaporates. Onheatbuildup Heat buildup on the unit during operation is normal and is not cause for alarm. Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot. Onthespeakersystem This speaker system is not magnetically shielded, and the picture on nearby TV sets may become magnetically distorted. [. . . ]