User manual SONY HANDYCAM HDR-FX1000

[. . . ] The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. ⷠIf you are not going to use the speakers for a long time, be sure to disconnect the speakers from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord. ⷠOne blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. [. . . ] important If your TV set has an on/off switch for its internal speaker, set this to off, and enjoy the sound of this speaker system. If your TV set does not, set the volume on your TV set to minimum. If you have a Sony XBR2 series TV or Sony Projection TV equipped with a speaker switch (For U. If your Sony XBR2 series TV set or Projection TV is compatible with SAVA series speakers, you can use the TV set's menu and remote control functions to operate this speaker system. for details , see the Operating Instructions supplied with your TV set. Be sure to connect the TV IN jacks on the left front speaker to the TV set's FIXED AUDIO OUTPUT jacks if you make this connection. 1 Use an optional CONTROL S cord to connect the CONTROL S TV IN jack on the left front speaker to the CONTROL S OUT jack on the back of the TV. This speaker system is equipped with the 5. By connecting your DVD player or other digital video source through a multichannel decoder (e. , Dolby Digital (AC-3) decoder, DTS decoder) to these jacks, you can enjoy theaterquality Multi-Channel Surround sound in your own home. 2 Follow the Operating Instructions supplied with your TV set to set it to operate this speaker system. When you press U, the ON indicator goes off and the speaker system is totally deactivated. When you press 1/u on the remote, the speaker system enters standby mode (the STANDBY indicator on the left front speaker lights up). If the test tone is not output in the order indicated in step 4 Turn off all components, then check the connection of the speaker that did not output the test tone. Power turns on and off automatically (Auto power on/off function) When you turn off the TV, the speaker system automatically turns off three minutes afterwards (the READY indicator lights up). The speaker system turns on again when you turn on the TV. The speaker system also turns on when you press INPUT (or either 1/u or INPUT SELECT on the remote). This function operates only when TV input is selected ("TV" appears in the display). You can enjoy the speaker's surround sound capability simply by choosing one of the five available surround modes: PRO LOGIC (Dolby Pro Logic) surround mode Reproduces superb theater-like presence and surround effects from video software encoded with Dolby Surround. STUDIO surround mode Creates a theater-like environment in your living room by adding the acoustic reflections of a theater to decoded Dolby Surround signals. hALL surround mode Reproduces the acoustics of a rectangular concert hall. Ideal for soft, acoustic sounds, or for giving an extra punch to debates and press conferences. [. . . ] Design and specifications are subject to change without notice. Accepts only supplied SS-T100 Rear speaker Accepts only supplied SS-T100 Wireless rear speaker Accepts only Sony models R-ch speaker Accepts only SAVA-700 R-ch speaker with supplied exclusive speaker cord Bass: ±10 dB at 100 Hz Treble: ±10 dB at 10 kHz With 8 ohm loads both channels driven, from 200 Hz - 20 kHz; rated 20 watts per channel minimum RMS power, with no more than 0. 5 m (5 ft) (1) Remote commander (remote) RM-J70 (1) Sony size-AA (R6) batteries (2) SCART adaptor (European model only) (1) Optional Wireless speaker system SA-IF70 The values indicated above were measured using a 230 V AC, 50 Hz power supply. Design and specifications are subject to change without notice. [. . . ]