User manual SONY HDR-FX1E

[. . . ] Before operating the unit, please read this manual thoroughly, and retain it for future reference. The electromagnetic fields at the specific frequencies may influence the picture and sound of this camcorder. This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables shorter than 3 meters (9. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] The screen shows the items you can operate at the moment. The recorded picture will not be affected by this setting. The recorded picture will not be affected by this setting. When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for this setting. The recorded picture will not be affected by this setting. When you connect your camcorder to outside power sources, [BRIGHT] is automatically selected for this setting. You can select the items listed below on the IN/ OUT REC menu. For details on how to select these items, see "Selecting menu items" (p. The settings you can adjust vary depending on the power mode of your camcorder. The screen shows the items you can operate at the moment. When the camcorder is connected to another device using an i. Select this to play back signals by switching the format between HDV and DV automatically. LINK connection, select this to record/play back signals input/output from the HDV/DV jack by switching the format between HDV and DV automatically. Select this to play back the signals in the HDV format only. LINK connection, select this to record/play back the input/ output signals in the HDV format only. Select this to play back the signals in the DV format only. LINK connection, select this to record/play back the input/ output signals in the DV format only. Otherwise, the connected TV may not be able to recognize the video signal from this camcorder. When [AUTO] is selected and the signal switches between HDV and DV, the picture and sound disappear temporarily. The format lamp of the selected format will light up during recording. When you output the picture during recording simultaneously to a connected device using an i. The use of Sony Excellence/Master mini DV cassettes is recommended to get the most out of your camcorder. [. . . ] Audio/Video input/output Video signal: 1 Vp-p, 75 (ohms), unbalanced, sync negative Audio signal: 327 mV (at load impedance 47 k (kilohms)), Input impedance more than 47 k (kilohms), Output impedance less than 2. 4 V (AC Adaptor) Average power consumption (when using the battery pack) During camera recording using the viewfinder with normal brightness: HDV recording 7. 9 W During camera recording using the LCD with normal brightness: HDV recording 7. Design and specifications are subject to change without notice. [. . . ]