User manual SONY HANDYCAM HDR-PJ200/S

[. . . ] Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. The recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Civic Office, your household waste disposal service or the shop where you purchased the product. [. . . ] Make sure the iPod is securely connected. The iPod cannot be operated with this unit. Make sure the iPod is securely connected. Make sure the iPod is securely connected. When daylight saving time begins, the clock does not employ the daylight saving time automatically. Press and hold CLOCK and SNOOZE/DATE/ SLEEP OFF simultaneously for at least 2 seconds to activate the Automatic DST function. iPod 4th generation (color display) iPod 4th generation iPod nano 3rd generation (video) With normal use, the battery (CR2025) should last for about six months. When the remote commander no longer operates the unit, replace the battery with a new one. iPod classic iPhone CR2032 CR2025 iPod nano 2nd generation (aluminum) iPod 5th generation (video) iPod nano 1st generation Notes Do not attempt to charge the battery. If you are not going to use the remote commander for a long time, remove the battery to avoid any damage that may be caused by leakage and corrosion. NOTES ON LITHIUM BATTERY Wipe the battery with a dry cloth to assure a good contact. Be sure to observe the correct polarity when installing the battery. Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur. iPod mini Notes In these Operating Instructions, "iPod" is used as a general reference to iPod functions on an iPod or iPhone, unless otherwise specified by the text or illustrations. The connector of the unit is for sole use with an iPod. If OFF/ALARM RESET is not pressed, the alarm will sound for about 5 minutes. If "" appears in the display, the alarm will not sound in the event of power interruption. Replace the battery if "" appears. During a power interruption, the alarm will sound at the set time only once. To return to the iPod To stop listening Press iPod & iPhone . Press OFF, and stop playback on the connected unit. Notes Refer also to the connected equipment's manual. The supplied audio connecting cable may not be used with some external equipment. In this case, use a cord suitable for the external equipment you are using. When you listen to the radio with external equipment connected, turn off the connected equipment to prevent noise. If noise occurs, even when the equipment is turned off, disconnect and place the external equipment away from the unit. To display the year and date Press SNOOZE/DATE/SLEEP OFF once for the date, and press it again for the year. After a while, the display will change back to the current time automatically. ­Auto preset tuning 1 Press RADIO BAND to turn on the radio 2 3 and select the AM or FM band. [. . . ] In such a case, cancel the Automatic DST/Summer Time adjustment and set the DST display manually as necessary. Customers living in a country/region that do not use daylight saving time (summer time) must cancel Automatic DST/Summer Time adjustment before using the unit. 3 Adjust the volume using VOLUME + or ­. + : scans upward through the frequency bands. ­ : scans downwards through the frequency bands. Scanning starts from the currently-tuned frequency. [. . . ]