User manual SONY HDR-PJ430V

[. . . ] 3 Follow the chart below to choose the network setting method. ≥ If you want to perform wireless setting with your Mac/PC, or you want to apply the advanced setting, refer to [SC-NE5DB] “Method 4” or [SC-NE3] “Method 3” in the operating instructions. Wi-Fi® connection guide You can wirelessly stream music from an iOS device, an Android device or a Mac/PC to SC-NE5DB/SC-NE3’s speakers. To use this music-streaming feature, SC-NE5DB/SC-NE3 must join the same 2. 4 GHz wireless network as the compatible device through the wireless network router (access point). TM Does your wireless network router support WPS (Wi-Fi Protected SetupTM)? [. . . ] To use this music-streaming feature, SC-NE5DB/SC-NE3 must join the same 2. 4 GHz wireless network as the compatible device through the wireless network router (access point). TM Does your wireless network router support WPS (Wi-Fi Protected SetupTM)?Yes No / Do not know Which model do you use?iOS device*1, Android device or Mac/PC Wireless network router SC-NE5DB/ SC-NE3 SC-NE5DB SC-NE3 *1: Refer to the Operating Instructions for the compatibility. Screen images used in this sheet : iPhone 4S, iOS 6. 0. 1 Are you using an iPod touch/iPhone/iPad?Yes No WPS button method Using the iPod dock (SC-NE5DB only) The following explanations are based on an iPhone. Using the smartphone app ∫ Note for the iOS version After step 2 1 Enter the password for the home wireless network to which the iOS device is connected. the remote 1 Press [SETUP] on to select control repeatedly The settings are completed when “SUCCESS” is displayed and indicator lights in blue. iPod touch/iPhone/iPad with iOS 5. 0 or later: 4 When a message indicating the completion of the connection to this system is displayed, restart the app. 6 7 Lights in blue *2 : The marking may differ. The settings are completed when “SUCCESS” is displayed and the indicator on the speaker unit lights in blue. Press [OK] on the remote control to exit. “NET SETUP” and then press [OK]. 5 When a message indicating the completion of the Wi-Fi setup of this system is displayed, close the app, and then check the operation of AirPlay, etc. Stereo 2 Start “Panasonic Setup” on System Network 3 Press [OK] on the remote control to exit. your smartphone and follow the indications. Dedicated cable supplied with the iOS device Using AirPlay The following explanations are based on an iPhone. Preparation ≥Turn this system on. 1 Connect the iPhone to your home wireless network. “Settings” “Wi-Fi” Turn on Your home wireless network name (SSID)*3 *3 : You may be prompted for the password. Enter the password of your home wireless network. 2 Select “Panasonic NE5 (NE3) _ _ _ _ _ _” from the AirPlay icon and start play. “Panasonic NE5 (NE3) _ _ _ _ _ _” “Music” Play starts. [. . . ] Press [OK] on the remote control to exit. “NET SETUP” and then press [OK]. 5 When a message indicating the completion of the Wi-Fi setup of this system is displayed, close the app, and then check the operation of AirPlay, etc. Stereo 2 Start “Panasonic Setup” on System Network 3 Press [OK] on the remote control to exit. your smartphone and follow the indications. Dedicated cable supplied with the iOS device Using AirPlay The following explanations are based on an iPhone. Preparation ≥Turn this system on. 1 Connect the iPhone to your home wireless network. “Settings” “Wi-Fi” Turn on Your home wireless network name (SSID)*3 *3 : You may be prompted for the password. [. . . ]