User manual SONY HANDYCAM HDR-TG1 HOW TO SHOOT A GREAT WEDDING VIDEO.

[. . . ] When you tune in a DAB station or an FM station that provides RDS services (European model only), the service name or station name appears on the display. / . To fast-forward or fast-rewind, hold down the button. / . Remote DAB/FM lead antenna (Extend it horizontally. ) To right speaker To wall outlet Speaker cord (Red/) Speaker cord (Black/) To left speaker For manual tuning (FM band only) Press TUNING MODE repeatedly until "MANUAL" appears, and then press + / repeatedly to tune in the desired station. Notes on DAB stations When tuning in a DAB station, it may take a few seconds before you hear any sound. Primary service is automatically received when secondary service ends. [. . . ] The clock is displayed for about 8 seconds. To display the clock when the system is off ® Stop playback Select a folder on an MP3 disc Select a track or file Find a point in a track or file Select Repeat Play (select folder) +/ repeatedly. Hold down (rewind) / (fast forward) during playback, and release the button at the desired point. REPEAT repeatedly until "REP" or "REP1" appears. Do not save other types of tracks or files, or unnecessary folders on a disc that has MP3 files. Folders that have no MP3 files are skipped. MP3 files are played back in the order that they are recorded onto the disc. The system can only play MP3 files that have a file extension of ". mp3". If you use both timers, the Sleep Timer has priority. Troubleshooting 1 Make sure the power cord and speaker cords are correctly and firmly connected. iPod There is no sound. Make sure the iPod is connected securely. Adjust the volume. Messages FULL : You tried to program more than 25 tracks or files (steps). NO DISC : There is no disc in the player, or you have loaded a disc that cannot be played. NoPRESET (DAB only) : There is no stored preset station. NO SERV (DAB only) : There is no supported DAB broadcast in your country or region. If the issue persists, contact your nearest Sony dealer. The iPod does not function. Input Make sure the iPod is connected securely. Make sure the iPod is updated with the latest software. If not, update the iPod before using with the system. Because the operation of the system and the iPod are different, you may not operate the iPod using buttons on the remote or unit. In this case, use the control buttons on the iPod. AUDIO IN (stereo mini jack): Sensitivity 550 mV, impedance 50 kilohms PHONES (stereo mini jack): Accepts headphones with an impedance of 8 ohms or more SPEAKERS: Accepts impedance of 4 ohms Outputs Standby power consumption: 0. 5 W Halogenated flame retardants are not used in the certain printed wiring boards. CDplayersection The iPod cannot be charged. Adjusting the sound To Adjust the volume Generate a more dynamic sound (Dynamic Sound Generator X-tra) Set the sound effect Press VOLUME +/ . DSGX on the unit. 2 Select the timer set mode. Press TIMER MENU . 3 Set the play timer. Press / repeatedly to select "PLAY SET, " then . press General The system does not turn on. Is the power cord plugged in? Make sure the iPod is connected securely. You can use the system as a battery charger for iPod only when the system is on. System: Compact disc and digital audio system Laser Diode Properties Emission Duration: Continuous Laser Output*: Less than 44. 6µW * This output is the value measurement at a distance of 200mm from the objective lens surface on the Optical Pick-up Block with 7mm aperture. Frequency response: 20 Hz 20 kHz Signal-to-noise ratio: More than 90 dB Dynamic range: More than 90 dB Tunersection "PROTECT" appears. 4 Set the time to start playback. EQ . Press / repeatedly to set the time, then press . The system has entered standby mode unexpectedly. 5 Use the same procedure as in step 4 to set the time to stop playback. 6 Select the sound source. This is not a malfunction. The system enters standby mode automatically in about 30 minutes when there is no operation or audio signal output. [. . . ] Do not expose discs to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight. iPodsection Compatible iPod models: On safety to display the clock, and then press while holding down , until "CD POWER OFF" appears. With CD player power turned off, access time is increased. To turn on CD player power, repeat the procedure until "CD POWER ON" appears. To reset the system to factory settings Play does not start from the first track. Return to Normal Play by pressing PLAY MODE repeatedly until both "PGM" and "SHUF" disappear. If the system still does not operate properly, reset the system to factory settings. Use buttons on the unit to reset the unit to its factory default settings. Completely disconnect the power cord (mains lead) from the wall outlet (mains) if it is not going to be used for an extended period of time. [. . . ]