User manual SONY HDR-TG5V

[. . . ] Some jurisdictions do not allow the limitation of such rights, in such case the above limitation may not apply to you. Trademarks and Notices: You may not remove, alter, cover or deface any trademarks or copyright notices on the SOFTWARE. The SOFTWARE may create data files automatically for use with the SOFTWARE. You may permanently transfer all of your rights under this LICENSE only as part of a sale or transfer of the PRODUCT, provided you retain no copies of the SOFTWARE, transfer all of the SOFTWARE (including all copies (only if permitted to copy under "Limitation on Reverse Engineering, Decompilation and Disassembly" Paragraph above), component parts, the media and printed materials, all versions and any upgrades of the SOFTWARE and this LICENSE), and the recipient agrees to the terms and conditions of this LICENSE. [. . . ] Your camcorder is confirming the GPS signal, and will be able to acquire location information soon. Wait until your camcorder completes the triangulation. Your camcorder is receiving a GPS signal, and can acquire location information. Your camcorder is receiving a strong GPS signal, and can acquire location information. Movies and photos recorded during triangulation by GPS will be recorded with location information. If you do not want to record location information, set the GPS switch to OFF. It may take from several seconds to several minutes to acquire the location information when you use the GPS for the first time or use it again after long intervals. Even if the camcorder is turned off, the GPS function is working as long as the GPS switch is set to ON. Make sure that the GPS switch is set to OFF during take off and landing of an airplane. You may not be able to acquire location information depending on the strength of GPS reception. When fewer than 3 dots are displayed, the The 3 dots in the lower right of GPS signal is not stable enough to triangulate in the current environment. To successfully triangulate, move to an open area first, and turn the GPS switch to OFF and ON again, or turn the power of your camcorder off and on. Your camcorder quits trying to triangulate after a few minutes of unsuccessful attempts. If your (triangulation process not started) even after moved to an open area, camcorder continues to display turn the GPS switch to OFF and ON again, or turn the power of your camcorder off and on. Where movies and photos were recorded is marked on a map. You can select a movie or photo by recording location. Select the recording media which contains the movie or photo you want to play back before starting this operation. Touch the image marker where You recorded the movies and photos to be played back. You can use the Map Index only with movies and photos having location information that was recorded with the GPS switch set to ON. You cannot use the Map Index with photos recorded on "Memory Stick PRO Duo" media. The movies or photos recorded at that location are displayed on the left of the screen. Touch the desired movie or You can change the scale using the zoom lever (W: larger, T: smaller). [. . . ] The map data included is as of the date of production of this manual. GPS maps will appear in 2-dimensional graphics except for certain landmarks in Japan, which will appear in 3D. The map always displays the north at the top. You cannot change the language on the map. [. . . ]