User manual SONY HANDYCAM HDR-UX20

[. . . ] the recycling of materials will help to conserve natural resources. For more detailed information about recycling of this product, please contact your local Sony office or visit Sony Europe's web site for business customers: http://www. Depending on your video camera, zooming can be accelerated by using the ZOOM SPEED change over switch together with the amount the zoom lever is rotated. [. . . ] SLOW mode In SLOW mode, the video camera zooms at the slowest speed, regardless of how much the zoom lever is rotated. MID mode In MID mode, the video camera zooms quickly, depending on how much the zoom lever is rotated. (4 stages) FAST mode In FAST mode, the video camera zooms even faster, depending on how much the zoom lever is rotated. This product with the CE marking complies with the EMC Directive (89/336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards: · eN55103-1: Electromagnetic Interference (Emission) · EN55103-2: Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban outdoors), and E4 (controlled EMC environment, ex. The last several seconds of recorded images before the tape was stopped will be played on the LCD screen, and then the video camera will return to standby mode. * If HDV standard and DV standard have been mixed on the same tape, an image may not appear on the screen when the REC REVIEW button is pressed. ⷠThe zoom direction of the zoom lever can be switched using the ZOOM DIRECTION change over switch. ⷠThe zoom speed can be switched to one of three levels using the ZOOM SPEED change over switch. Do not leave the Remote Commander in direct sunlight, near heaters, or in locations with high humidity. ⷠWhen inserting or pulling the Remote plug, be sure to do so in a straight line. Performing this operation forcibly may damage either the remote plug or the unit connected. 2Align the center of the pan handle with the V groove on the cramp, and rotate the cramp knob clockwise to lock it firmly. * Depending on the pan handle attached, the Remote Commander may make contact with the grip of the pan handle when it is in use. [. . . ] 2Align the center of the pan handle with the V groove on the cramp, and rotate the cramp knob clockwise to lock it firmly. * Depending on the pan handle attached, the Remote Commander may make contact with the grip of the pan handle when it is in use. Set the Remote Commander a little apart from the grip. [. . . ]