User manual SONY HDR-XR200V

[. . . ] Your camcorder cannot find a GPS signal, therefore, it cannot triangulate. Your camcorder is confirming the GPS signal, and will be able to acquire location information soon. Wait until your camcorder completes the triangulation. Your camcorder is receiving a GPS signal, and can acquire location information. [. . . ] Set the GPS switch to ON so that your camcorder can acquire the current location information. When your camcorder cannot acquire the current location information, the center marker turns gray and the map shows the last location acquired. If you hold a certain point, the map keeps scrolling. Your camcorder can maintain accurate time and compensate for time difference automatically, by acquiring time and location information from GPS. If you touch a certain point on the screen, the map shows the area with that point at the center. Touch (your location) at the bottom left of the LCD screen to move the current location back to the center. To close the map screen Notes The map always displays the north at the top. Tips You can change the scale using the zoom lever or zoom buttons (W: larger, T: smaller). Your camcorder acquires the current location information every 10 seconds. Notes You must set the date and time on your camcorder before using your camcorder. There may be discrepancies of a few seconds even if [AUTO CLOCK ADJ] is activated. The clock is adjusted automatically by [AUTO CLOCK ADJ] when you turn off your camcorder if the camcorder is receiving a GPS signal while it is being used. The clock is not adjusted until the camcorder is turned off. Also, the clock is not adjusted unless the camcorder is receiving a GPS signal, even if the GPS switch is set to ON. The [AUTO AREA ADJ] function automatically compensates for a time difference when it detects a time differences with the current area. The clock may not be adjusted to the correct time automatically, depending on the country/ region selected for your camcorder. During playback, your camcorder can display the coordinates information recorded on movies and photos. Your camcorder may not be able to receive radio signals from GPS satellites because of obstructions. [. . . ] The camcorder contains map data for the following countries/regions. The map data included is as of the date of production of this manual. GPS maps will appear in 2-dimensional graphics except for certain landmarks in Japan, which will appear in 3D. You cannot change the language on the map. [. . . ]