User manual SONY HI-MD WAV IMPORTER FOR MAC VER. 1.0

[. . . ] However, SONY bears no other responsibility. · The software provided with this recorder cannot be used with equipment other than that which is so designated. · Please note that, due to continued efforts to improve quality, the software specifications may be changed without notice. · Operation of this recorder with software other than that provided is not covered by the warranty. [. . . ] However, tracks recorded in modes other than linearPCM are grayed out and cannot be selected. Tracks transferred to the SonicStage software on a Windows computer are grayed out and cannot be selected, even if they were recorded in linearPCM on one of the designated Hi-MD Walkman models. 4 Drag the selected tracks to the destination. The progress indicator window appears and the importing process starts. The installation appears to have stopped before it has completed. To remove the disc from the Hi-MD Walkman or disconnect the USB cable It is important that you follow the steps below when removing the disc or disconnecting the Hi-MD Walkman from the computer. If you do not, damage to the data may occur. 1 Drag the ([NO NAME] icon) on the desktop to the trash can. 2 Make sure that the "REC" indication is not displayed in the display window of the Hi-MD Walkman. Using a Hi-MD Walkman connected to the computer Cause/Remedy · The MD Walkman is not firmly connected with the supplied USB cable to the computer. , Reconnect the Hi-MD Walkman to the computer firmly. , Remove and reconnect the Hi-MD Walkman. If the computer still does not recognize the Hi-MD Walkman, disconnect the cable, restart the computer, and then make the connection again. · The anti-virus software is active. · A disc is not inserted in the Hi-MD Walkman. , Check if a disc is inserted in the Hi-MD Walkman. · The software installation failed. , Disconnect the connected device and install the software again using the supplied CD-ROM. · The connections are made through a USB hub. , Operations are not guaranteed for USB-hub connections. Connect the Hi-MD Walkman directly to the USB connector on the computer. Even though the supplied · It takes time to recognize the software. USB cable is used to · The other software application is running. connect the Hi-MD , Reconnect the supplied USB cable after a while. If the Walkman to the computer still does not recognize the Hi-MD Walkman, computer, the display on disconnect the Hi-MD Walkman, restart the computer, and the Hi-MD Walkman connect the supplied USB cable again. Even though your computer recognize the Hi-MD Walkman, it does not operate normally. [. . . ] For this reason, you should disable the sleep or resume function before connecting the Hi-MD Walkman. Make sure not to restart the computer while it is still connected to the Hi-MD Walkman. Make sure to place the Hi-MD Walkman at a stable, vibration-free place while importing tracks. Make sure not to connect the Hi-MD Walkman to the computer through a USB hub. [. . . ]