User manual SONY HID-C10 DATASHEET

[. . . ] Your statutory rights (if any) are not affected. Do not place any object on the products. If you do so, the system may fall and cause injury or property damage. Products by Sony are designed with safety in mind. [. . . ] If the following precautions are not observed, injury or property damage may occur. Do not install any equipment other than the specified product. If you install equipment other than that specified, it may fall or break, and cause injury. Do not place anything hot directly on the products. If the AC power cord (mains lead) or connecting cords are pinched between the products and the wall, floor, or other object, or bent or twisted by force, the internal conductors may become exposed and cause a short circuit or an electrical break. Do not step on the AC power cord (mains lead) or connecting cords when you carry the products. The cord may be damaged, and this may result in a fire or electric shock. Secure the TV Sound Bar System and TV firmly when installing them together. then , secure the TV Sound Bar System-installed TV firmly on the stand. If the TV Sound Bar System and TV are not installed securely, they may fall or topple over, and cause injury. Do not apply weight to the products or subject them to any kind of impact. Screw for support belt (+PSW M4 × 10 mm) (H) (1) Wood screw for support belt (M3. Screw for TV stand head (+PSW M5 × 20 mm) (E) (3) You can use this speaker attachment bracket to install the TV Sound Bar System on the TV stand. This speaker attachment bracket is designed for use with the stand supplied with TV only. This speaker attachment bracket cannot be used with the SU-FL71M/SU-FL71L floor stand. Remove the screws from the TV stand, then detach the TV from the TV stand. Remove the screws from the original neck, then detach the original neck from the TV stand. Install the extension neck for TV stand (B) to the TV stand using the screws removed in step 2. The screw removed in step 2 Remove the screw on the rear cover of the TV Sound Bar System, then remove the rear cover. Mount the attachment bracket (A) to the TV Sound Bar System with the screw for attachment bracket (+PSW M5 × 12 mm) (C). Be sure to place the TV on a soft thick cloth with the TV screen facing down to prevent damaging the surface of the LCD. Mount the TV Sound Bar System to the TV with the screw for attachment bracket (Silver) (D). [. . . ] To avoid injury, place the TV Sound Bar System-installed TV less than 25 cm (9 7/8 in) from the wall, and firmly secure the TV to the wall. Be careful not to pinch your fingers when setting up the TV or rack. Install the TV after allowing for a space of less than 25 cm (9 7/8 in) from the wall. The wall will prevent the TV from falling even if the TV leans backward towards the wall. [. . . ]