User manual SONY HKSP-525 OPERATING MANUAL

[. . . ] Operation Software for DOWN CONVERTER HKSP-525 User's Guide Universal Control Panel UCP-8060 1st Edition (Revised 1)[Japanese/English] Software Version 1. 10 and Later OE --~Z, <`, ", , , , , -A, , \tgEFA, , , Z^ ୾`, "--e, `S", , , ^", Z, , , , ƷA, , , , , \tgEFA, '`, Zg--p, , , , , ͷA'~OE @<Z~, , , , , , , B 2003 Sony Corporation \tgEFA, Zg--p, , , , , , , , <q--l, `SQA, , , ` ZOZ, , , , , , , 鷿<, , , , , A"Z, ^, , ̷"C, , OE", , , B oe^A`, OE^, , , s--, , , , , , , , Z, `, , , , , , B, , ^SO, ̷, , --eZ, -, , , B , , \tgEFA, ͷAZw', , , `'u^SO, , Zg--p, , , , , B , , \tgEFA, Zd--l, ͷA--, , , --\, , -ϷX, , , , , , , , , , A, --, -, , , B NOTICE TO USERS 2003 Sony Corporation. This manual or the software described herein, in whole or in part, may not be reproduced, translated or reduced to any machine readable form without prior written approval from Sony Corporation. SONY CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE WITH REGARD TO THIS MANUAL, THE SOFTWARE OR SUCH OTHER INFORMATION. IN NO EVENT SHALL SONY CORPORATION BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL OR SPECIAL DAMAGES, WHETHER BASED ON TORT, CONTRACT, OR OTHERWISE, ARISING OUT OF OR IN CONNECTION WITH THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN OR THE USE THEREOF. 2 "{OE ZY ST--v . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Detail On Sets the detail function ON or OFF. OFF: The details adjustment is disabled. Frequency Adjusts the frequency of an H detail signal. Adjustable range: 0 to 3 Factory setting: 2 H/V Ratio Adjusts the mixing ratios of the H and V signals. Adjustable range: 1 to 7 Factory setting: 4 Menu 31 Adjust (continued) Detail1 Adjusts the details. Detail On Sets the detail function ON or OFF. OFF: The details adjustment is disabled. Gain Adjusts the total gain of a detail signal. Adjustable range: 0 to 127 Factory setting: 64 Limiter Adjusts the clipping level for the excess level in the + (positive) and (negative) directions for a detail signal. Adjustable range: 0 to 63 Factory setting: 32 Crispening Adjusts the level of crispening for a detail signal. Adjustable range: 0 to 15 Factory setting: 8 Level Depend Adjusts the amount of compression in the dark area. Adjustable range: 0 to 11 Factory setting: 6 Delay Audio Delay Word: Sets the audio delay in units of words (1/48000 second). Note The adjustable range varies depending on the settings for Format and System Delay. Video H-Phase Line: Sets the line phase of a video signal in units of lines. Adjustable range: If Ref Input is set to Input Video and System Delay is set to Minimum: 1 to +127 Otherwise: 5 to +5 Factory setting: 0 Clock: Sets the line phase of a video signal in units of clock pulses (13. 5 MHz). Adjustable range: If Format is set to 525: 429 to +429 If Format is set to 625: 432 to +432 Factory setting: 0 System Delay Sets the delay time for converting from HD to SD. This is enabled when Ref Input is set to Input Video. Frame: An SD signal delayed by 1 frame is output. Minimum: An SD signal of minimum delay is output. Note The minimum delay time varies depending on the Format. If Format is set to 525: 42H If Format is set to 625: 50H 32 Menu Operations When the power is supplied to the UCP-8060, the system indicator lights in red. When initialization of the unit is finished normally, the indicator lights in green, and the Main Screen appears in the display window. You can select the menu or items or adjust the parameters displayed in the window with the jog roller, jog buttons, select buttons, and control knobs. The display window also functions as a touch panel, and you can select the menu and items, by touching on-screen objects. Terminating the operation software 1 Press the select L button (Option) on the top page of this operation software. The Option Menu appears. 2 3 Turn the jog roller to select "8. [. . . ] Attach the label so that it does not stick out beyond the labeling position. Do not write forcefully on the "Memory Stick Duo" memo area. Carry and store the "Memory Stick" in its case. Do not touch the connector of the "Memory Stick" with anything, including your finger or metallic objects. [. . . ]