User manual SONY HMD-A200

[. . . ] The model and serial numbers are located at the rear of the unit. record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. If you have any questions about this product, you may call: Sony Customer Information Center 1-800-222-SONY (7669) or write to: Sony Customer Information Center 1 Sony Drive, Mail Drop #T1-11, Park Ridge, NJ 07656 To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] You can make numerous adjustments to your monitor using the on-screen menu. Press the center of the control button to display the main MENU on your screen. See page 9 for more information on using the control button. See page 9 for more information on using the control button. Use the control button to select one of the following menus. To close the menu Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds. Press the center of the control button to display the main MENU on your screen. You can use this to match the monitor's colors to a printed picture's colors. 9 LANGUAGE/INFORMATION (page 8, 15) Select the LANGUAGE/ INFORMATION menu to choose the on-screen menu's language and display this monitor's information box. Highlight the desired menu by moving the control button up (M), down (m), and left (<) or right (, ) to move sideways. Move the control button left (<) or right (, ) to make the adjustment. If the signal matches one of this monitor's factory preset modes, the resolution is also displayed. Press the center of the control button once to return to the main MENU, and twice to return to normal viewing. If no buttons are pressed, the menu closes automatically after about 30 seconds. You can reset the adjustments using the RESET menu. Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These settings are stored in memory for all input signals. Adjusting the vertical size or centering of the picture (V-SIZE/CENTER) These settings are stored in memory for the current input signal. Then move the control button </, to make the adjustment. Adjusting the horizontal size or centering of the picture (H-SIZE/CENTER) These settings are stored in memory for the current input signal. These settings are stored in memory for the current input signal. [. . . ] * If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result. A humming noise may be heard, but this is not a malfunction. Displaying this monitor's name, serial number, and date of manufacture (INFORMATION) 1 Press the center of the control button. If the problem persists, call your authorized Sony dealer and give the following information. [. . . ]