User manual SONY HMD-A230

[. . . ] The model and serial numbers are located at the rear of the unit. record these numbers in the spaces provided below. Refer to them whenever you call upon your dealer regarding this product. To prevent fire or shock hazard, do not expose the unit to rain or moisture. [. . . ] This message is displayed only when your computer is in a power saving mode and you press any one of the buttons on the monitor. Try pressing any key on the computer keyboard or moving the Check that all plugs are firmly seated in their sockets. Note that with some input signals and/ or graphics board the periphery of the screen is not fully utilized. Just after turning on the power switch, the size/center may take a while to adjust properly. Check that the graphic board is completely seated in the proper bus slot. To display this monitor's name, serial number, and date of manufacture. While the monitor is receiving a video signal, press and hold the Joystick for more than five seconds to display this monitor's information box. * If you place equipment that generates a magnetic field, such as a speaker, near the monitor, or if you change the direction the monitor faces, color may lose uniformity. X White does not look white (damper wires) These lines do not indicate a malfunction; they are a normal effect of the Trinitron picture tube with this monitor. These are shadows from the damper wires used to stabilize the aperture grille. The aperture grille is the essential element that makes a Trinitron picture tube unique by allowing more light to reach the screen, resulting in a brighter, more detailed picture. 0 inches) Resolution Maximum Horizontal: 1280 dots Vertical: 1024 lines Recommended Horizontal: 1024 dots Vertical: 768 lines Standard image area Approx. This monitor is equipped with a self-diagnosis function. If there is a problem with your monitor or computer, the screen will go blank and the 1 (power) indicator will either light up green or flash orange. if the 1 (power) indicator is lit in orange , the computer is in power saving mode. Try pressing any key on the keyboard or moving the mouse. 2 Press the 1 (power) button twice to turn the monitor Off and then on. If all 4 color bars appear (white, red, green, blue), the monitor is working properly. If the fault still exists, check your computer. If the color bars do not appear, there is a potential monitor failure. If the 1 (power) indicator lights up green, the monitor is working properly. if the 1 (power) indicator is still flashing , there is a potential monitor failure. [. . . ] This type of contact may result in a scratched picture tube. Clean the cabinet, panel and controls with a soft cloth lightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent, such as alcohol or benzine. Transportation When you transport this monitor for repair or shipment, use the original carton and packing materials. [. . . ]