User manual SONY HMD-A440

[. . . ] Increase the separation between the equipment and receiver. ­ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. [. . . ] You want to adjust and press the center of the joystick. Then move the joystick </, to make adjustments. This monitor complies with the "DDC" Plug & Play standard and automatically detects all the monitor's information. no specific driver needs to be installed to the computer. The first time you turn on your PC after connecting the monitor, the setup Wizard may appear on the screen. In this case, follow the on-screen instructions. The Plug & Play monitor is automatically selected so that you can use this monitor. Brightness and contrast adjustments are made using a separate BRIGHTNESS/CONTRAST menu. These adjustments are effective for all input signals. If you set the brightness and contrast level to "0", the picture will black out and no picture will appear. Main menu icons and adjustment items Sub menu icons and adjustment items Horizontal position Horizontal size Adjusting the size or centering of the picture*1 Vertical position Vertical size Enlarge/reduce Rotating the picture*2 Expanding or contracting the picture sides*1 Adjusting the shape of the picture Shifting the picture sides to the left or right*1 Adjusting the picture width at the top of the screen*1 Shifting the picture to the left or right at the top of the screen*1 Adjusting the color of the picture*2 See " Adjusting the convergence*2 Selecting language : To adjust the color of the picture". Horizontally shifts red or blue shadows Vertically shifts red or blue shadows Selecting the on-screen menu language*3 DEGAUSS: demagnetizes the monitor. The COLOR settings allow you to adjust the picture's color temperature by changing the color level of the white color field. X Adjustment items You can select the preset color temperature from 5000K or 9300K. If necessary, you can make additional fine adjustments to the color by selecting . To restore your monitor to the factory settings, refer to the following steps. Note When "reset the adjustment for all input signal" is activated, the customized language selection goes back to the default language of English. When the monitor receives an input signal, it automatically matches the signal to one of the factory preset modes stored in the monitor's memory to provide a high quality picture (see "Preset mode timing table" on page i). For input signals that do not match one of the factory preset modes, the digital Multiscan technology of this monitor ensures that a clear picture appears on the screen for any timing in the monitor's frequency range (For A240 horizontal: 30 ­ 70 kHz, vertical: 48 ­ 120 Hz and for A440 horizontal: 30 ­ 96 kHz, vertical: 48 ­ 170 Hz). If the picture is adjusted, the adjustment data is stored as a user mode and automatically recalled whenever the same input signal is received. Check that the video signal cable is properly connected and all plugs are firmly seated in their sockets. Try pressing any key on the computer keyboard or moving the mouse. [. . . ] (damper wires) These lines do not indicate a malfunction; they are a normal effect of the Trinitron picture tube with this monitor. These are shadows from the damper wires used to stabilize the aperture grille. The aperture grille is the essential element that makes a Trinitron picture tube unique by allowing more light to reach the screen, resulting in a brighter, more detailed picture. 406 mm (16 inches) Horizontal: 1280 dots Vertical: 1024 lines Horizontal: 1024 dots Vertical: 768 lines Approx. [. . . ]