User manual SONY HT-CT260

[. . . ] 4-431-775-12(2) Home Theatre System Operating Instructions Mode d’emploi US FR Manual de instrucciones ES 4-431-775-12(2) ©2012 Sony Corporation Printed in Malaysia HT-CT260/HT-CT260HP WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the unit itself has been turned off. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. [. . . ] € The connection history with this system is deleted on the connected device. Bluetooth Function About the indicator for Bluetooth The (Bluetooth) indicator lights or flashes in blue to allow checking the Bluetooth status. Attempting to connect with a Bluetooth device The system has established in connection with a Bluetooth device The system is in Bluetooth Standby mode (when the system is off) Lights up in blue. pairing automatically Flashes slowly in blue. If “BT AU” is selected with the INPUT +/– buttons with no pairing being set with a Bluetooth device on the system, the system automatically sets pairing with it. the system enters pairing mode continued 25US and pairing is performed automatically , as described below. 5 Select “HT-CT260” on the list of devices detected on the Bluetooth device. If entering the Passkey is requested, enter “0000. € 6 TV VOL TV CH INPUT +/– Make the Bluetooth connection on the Bluetooth device. When the Bluetooth connection is made correctly, the (Bluetooth) indicator lights in blue and the pairing information is stored in the system. Notes • Use a Bluetooth device such as Bluetooth mobile phone in an easily visible place in the same room where the Sound Bar is placed. € If Wi-Fi equipment is used, Bluetooth communication may become unstable. In that case, use the Bluetooth device as close as possible to the Sound Bar. € Sound may be interrupted because of a problem with the Bluetooth device. 1 2 3 Place the system and a Bluetooth device within 1 m. For details on setting the Bluetooth device in pairing mode, refer to the operating instructions supplied with the device. 4 When the detected devices are listed on the Bluetooth device, check that “HT-CT260” is listed. On some Bluetooth devices, the list may not be displayed. 26US Pairing this system with a Bluetooth device manually If you intend to connect a second and following pieces of Bluetooth equipment, manual pairing is necessary. 2 3 Push PAIRING on the remote control or touch (Bluetooth) on the Sound Bar for more than two seconds. perform steps 3 to 6 in “Pairing automatically” (page 25). Notes TV VOL TV CH INPUT +/– VOL +/– • “Passkey” may be called “Passcode, ” “PIN code, ” “PIN number” or “Password, ” etc. [. . . ] € Make sure you select the correct input on the remote control. /1 while pressing INPUT and VOL – on the Sound Bar. After checking the above item and fixing any problems, turn on the system. If the cause of the problem cannot be found even after checking the above item, consult your nearest Sony dealer. [. . . ]