User manual SONY HT-CT500 annexe 1

[. . . ] 4-143-834-11(1) Home Theatre System Operating Instructions HT-CT500 ©2009 Sony Corporation 3 WARNING Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To reduce the risk of fire, do not cover the ventilation opening of the apparatus with newspapers, tablecloths, curtains, etc. Do not place the naked flame sources such as lighted candles on the apparatus. [. . . ] · BD, DVD, SAT/CATV, DMPORT, VIDEO: Since the input of the TV is also switched automatically, you can watch the image of the selected component on the TV simply by pressing the buttons. · TV: The input of the TV switches automatically. When you connect a Sony TV, you can watch the TV simply by pressing the button. Tip 1 Press GUI MENU. "GUI MENU" appears in the front panel display of the subwoofer and the GUI menu appears on the TV screen. 2 3 4 5 Press X/x repeatedly to select [Settings], then press or c. The settings menu appears. Press X/x repeatedly to select [HDMI], then press . The HDMI menu appears. Press X/x repeatedly to select [Volume Limit], then press or c. Press X/x to select the maximum volume level you want, then press . The maximum volume level changes as follows: MAX y 49 y 48 y . . . . . . y 2 y 1 y MIN · You can control connected Sony components by pressing the input buttons. For details, see "Controlling connected Sony components with the remote" (page 72). 6 Press GUI MENU. The GUI menu turns off. Notes · This function is available only when the Control for HDMI function is set to on. · This function is not available when the output method is changed from the system speaker to the TV speaker. Tips · Sony recommends that you set the maximum volume level to a little lower than the volume you usually listen to. · Regardless of the maximum volume level you set, the VOLUME +/­ button of the subwoofer and the 2 +/­ button of the remote are operable. · If you do not want to limit the maximum volume level, select [MAX]. 62GB Turning off the TV, system, and connected components (System Power Off) When you turn the TV off by using the power button on the TV's remote, the system and the connected components turn off automatically. Also, when you turn the TV off by using the system's remote, the system and the connected components turn off automatically. TV TV AV SYSTEM STANDBY SAT/CATV DMPORT TUNER/ BAND Note · Depending on the status, the connected components may not be turned off. For details, refer to the operating instructions of the connected components. "BRAVIA" Sync features AV ?/1 BD DVD VIDEO1 VIDEO2 VIDEO3 /CLEAR /ENTER DISPLAY GUI MENU RETURN/ EXIT PRESET HOME MENU TOOLS/ OPTIONS PRESET TUNING TUNING TV (yellow) TV PROG 1 2 Press TV (yellow). The TV (yellow) button lights up for a moment. Press AV ?/1. The TV, the system, and the connected components are turned off. 63GB Enjoying the components while the system is in standby mode (HDMI Pass Through) You can use the components and a TV connected to this system without turning on the system. HDMI signals can be sent from the component to the TV via the subwoofer. The default setting is [OFF]. Note Settings Details [AUTO] When the TV is turned on while the system is in the standby mode, the system outputs HDMI signals from the system's HDMI output jack. Sony recommends this setting if you use a TV that is compatible with "BRAVIA" Sync. This setting saves power in the standby mode compared with the [ON] setting. When the system is in the standby mode, the system continuously outputs HDMI signals from the system's HDMI output jack. The system does not output HDMI signals when in the standby mode. Turn on the system to enjoy the connected component's source on the TV. This setting saves power in the standby mode, compared with the [ON] setting. [ON] [OFF] · This function is available when [Control for HDMI] is set to [ON]. DISPLAY GUI MENU GUI MENU Note C, X, x, c, RETURN/ EXIT PRESET HOME MENU TOOLS/ OPTIONS PRESET · When [AUTO] is selected, it may take a little more time for the picture and sound to be output to the TV than when [ON] is selected. Tip TUNING TUNING 1 Press GUI MENU. "GUI MENU" appears in the front panel display of the subwoofer and the GUI menu appears on the TV screen. 2 3 4 5 Press X/x repeatedly to select [Settings], then press or c. · When One-Touch Play is used on a connected component compatible with "BRAVIA" Sync, how the system is turned on depends on the HDMI Pass Through setting. ­ [AUTO] or [ON]: the system is turned on depending on the TV speaker setting. ­ [OFF]: By One-Touch Play, the system is always turned on. The settings menu appears. Press X/x repeatedly to select [HDMI], then press . 6 Press GUI MENU. The GUI menu turns off. The HDMI menu appears. Press X/x repeatedly to select [HDMI Pass Through], then press or c. The [HDMI Pass Through] menu appears. Press X/x repeatedly to select the setting you want, then press . 64GB 4 Tuner Functions Press X/x. Listening to FM/AM radio using the GUI menu You can listen to FM and AM broadcasts through the built-in tuner. Before operation, make sure you have connected the FM and AM antennas (aerials) to the subwoofer (page 36). Press X to scan from low to high frequency stations, or press x to scan from high to low. [. . . ] Since the gradation of the depth of a color can be expressed more finely with more bits, continuous color changes can be more smoothly expressed. Dolby Digital HDMI (High-Definition Multimedia Interface) is an interface that supports both video and audio on a single digital connection, allowing you to enjoy high quality digital picture and sound. The HDMI specification supports HDCP (Highbandwidth Digital Contents Protection), a copy protection technology that incorporates coding technology for digital video signals. PCM (Pulse Code Modulation) A method of converting analog audio to digital audio for easy enjoyment of digital sound. S-AIR (Sony Audio Interactive Radio frequency) This movie theater sound format is more advanced than Dolby Surround Pro Logic. In this format, the surround speakers output stereo sound with an expanded frequency range, and a subwoofer channel for deep bass is independently provided. This format is also called "5. 1" with the subwoofer channel designed as the 0. 1 channel (since it functions only when a deep bass effect is needed). [. . . ]