User manual SONY HT-DDW860

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] 1 channel signals are DVD specific signals not used in movie theaters. There may be no sound from the surround back speaker in Dolby Digital EX mode. Some discs have no Dolby Digital EX flag even though the packages have Dolby Digital EX logos. By adjusting the LEVEL menu, you can customize the sound fields to suit your particular listening situation. You can switch the audio input mode for components which have digital audio input jacks. The setup items you can adjust in each menu vary depending on the sound field. certain setup parameters may be dimmed in the display. This means that the selected parameter is either unavailable or fixed and unchangeable. You can adjust the balance and level of each speaker. These settings are applied to all sound fields except for effect level parameter. The effect level parameter settings are stored individually for each sound field. AUTO IN Gives priority to digital signals when there are both digital and analog connections. Start playing a source encoded with multi channel surround effects (DVD, etc. While monitoring the sound, press + or ­ repeatedly to select the setting you want. Repeat steps 3 and 4 to adjust the other parameters. When signals with a sampling frequency of more than 48 kHz is input, the tone and sound field cannot be used. Initial setting: BALANCE (0) Lets you adjust the balance between front left and right speakers. Initial setting: 0 dB You can adjust from ­10 dB to +10 dB in 1 dB steps. " appears in the display and all sound fields are reset to the initial setting. Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. This greatly compresses the dynamic range and lets you view movies late at night at low volumes. [. . . ] Remove any obstacles in the path between the remote and the receiver. ⷠReplace all the batteries in the remote with new ones, if they are weak. If the command mode of the receiver and the remote is different, you cannot operate the receiver with the remote. /1, the command mode switches between "C. [. . . ]