User manual SONY HT-DDW900

[. . . ] 2-662-263-11 (2) Home Theatre System Operating Instructions Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. Serial No. HT-DDW900 ©2006 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. [. . . ] These settings are applied to all sound fields. Select "2-TONE" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 38) and "Overview of the menus" (page 39). Settings for the surround sound (SUR menu) You can use the SUR menu to select the sound field you want for your listening pleasure. Select "3-SUR" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 38) and "Overview of the menus" (page 39). TONE menu parameters x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level) SUR menu parameters x S. F. SELCT (Sound field selection) Lets you select the sound field you want. For details, see "Enjoying Surround Sound" (page 47). Note The receiver lets you apply the last selected sound field to an input whenever it is selected (Sound Field Link). For example, if you select HALL for the SA-CD/CD input, then change to a different input and then return to SA-CD/CD, HALL will automatically be applied again. x EFFECT (Effect level) Lets you adjust the "presence" of the surround effect for sound fields selected with the MOVIE or MUSIC buttons and for "HP THEA" sound field. MAX The surround effect is maximum. 42US Settings for the tuner (TUNER menu) You can use the TUNER menu to set the FM station receiving mode and to name preset stations. Select "4-TUNER" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 38) and "Overview of the menus" (page 39). Settings for the audio (AUDIO menu) You can use the AUDIO menu to make settings for the audio to suit your preference. Select "5-AUDIO" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 38) and "Overview of the menus" (page 39). Amplifier Operations AUDIO menu parameters TUNER menu parameters x FM MODE (FM station receiving mode) · FM AUTO This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo. · FM MONO This receiver will decode the signal as mono signal regardless of the broadcast signal. x DEC. (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN jacks. AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. PCM PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound depending on the format. AUTO" and the sound from the digital audio jacks (for CD, etc. ) is interrupted when playback starts, set to "DEC. PCM". x NAME IN (Naming preset stations) Lets you set the name of preset stations. For details, see "Naming preset stations" (page 55). continued 43US x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. [. . . ] Refer to the operating instructions supplied with each component. · Assign the HDMI input correctly. Additional Information AM Ground wire (not supplied) To ground continued 69US Remote control The remote does not function. · Point the remote at the remote sensor on the receiver. [. . . ]