User manual SONY HT-DDWG800

[. . . ] 3-283-375-11(2) Home Theatre System Operating Instructions HT-DDWG800 ©2008 Sony Corporation WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. [. . . ] For details on adjusting the parameters, see "Navigating through menus" (page 37) and "Overview of the menus" (page 38). AUDIO menu parameters TUNER menu parameters x FM MODE (FM station receiving mode) · FM AUTO This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo. · FM MONO This receiver will decode the signal as mono signal regardless of the broadcast signal. x DEC. (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN and HDMI IN jacks. PCM When signals from the DIGITAL IN jack are selected, PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound, depending on the format. In this case, set this item to "DEC. When signals from the HDMI IN jack are selected, only PCM signals are output from the connected player. When signals in any other format are received, set this item to "DEC. AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. AUTO" and the sound from the digital audio jacks (for a CD, etc. ) is interrupted when playback starts, set to "DEC. PCM". x NAME IN (Naming preset stations) Lets you set the name of preset stations. For details, see "Presetting radio stations" (page 53). 42GB x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. This feature only functions for Dolby Digital sources. · DUAL M/S (Main/Sub) Sound of the main language will be output through the front left speaker and sound of the sub language will be output through the front right speaker simultaneously. · DUAL M (Main) Sound of the main language will be output. · DUAL S (Sub) Sound of the sub language will be output. · DUAL M+S (Main + Sub) Mixed sound of both the main and sub languages will be output. Settings for the video (VIDEO menu) You can use the VIDEO menu to make various adjustments for HDMI settings and to name inputs. Select "6-VIDEO" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 37) and "Overview of the menus" (page 38). Amplifier Operations VIDEO menu parameters x AUDIO FOR HDMI (Audio for HDMI) Lets you set the audio output for HDMI from the playback component connected to the receiver via an HDMI connection. · AMP The HDMI audio signals from the playback component is only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. Note Audio signals are not output from the TV's speakers when "AUDIO FOR HDMI" is set to "AMP". x A. V. [. . . ] · Point the remote at the remote sensor on the receiver. · Remove any obstacles in the path between the remote and the receiver. · Replace all the batteries in the remote with new ones, if they are weak. · Make sure you select the correct input on the remote. AM Ground wire (not supplied) To ground Radio stations cannot be tuned in. [. . . ]