User manual SONY HT-IS100

[. . . ] 3-299-270-21(2) Home Theatre System Operating Instructions HT-IS100 ©2008 Sony Corporation 3 WARNING To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like. Do not install the appliance in a confined space, such as a bookcase or built-in cabinet. To prevent fire, do not cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. And don't place lighted candles on the apparatus. [. . . ] Repeat 2 to 8 to store other stations. F To change the preset number g C, X, x, c, G f Restart from step 3. MENU MENU/HOME RETURN/EXIT TV CH TV CH + PRESET PRESET + < < . > TUNING m TV X x H TUNING + M Changing the AM tuning interval (for Australian models) The AM tuning interval can be set to either 10 kHz or 9 kHz. TUNING ­/+ 1 2 Press TUNER/BAND. 1 2 3 Press TUNER/BAND repeatedly until "AM" appears in the top panel display. Press X/x repeatedly until "AM Step?" appears in the top panel display, then press or c. You can change "FM" or "AM" by pressing TUNER/BAND. Press and hold TUNING + or ­ until the auto scanning starts. Scanning stops when the system tunes in a station. "TUNED" and "ST" (for stereo program) light up in the top panel display. "9k t 10k" or "10k t 9k" appears in the top panel display. 3 4 Press MENU. Press X/x repeatedly until "Memory?" appears in the top panel display. 4 5 Press . "Complete!" appears in the top panel display. The AM tuning interval is changed. Press MENU. Note · If you change the interval, AM preset stations will be erased. 46GB Listening to the Radio Preset radio stations in the system's memory first (see "Presetting Radio Stations" (page 46)). TV ?/1 AV ?/1 To listen to non-preset radio stations Use manual or automatic tuning in step 2. For manual tuning, press TUNING + or ­ repeatedly. For automatic tuning, press and hold TUNING + or ­. The automatic tuning stops automatically when the system receives a radio station. To stop the automatic tuning manually, press TUNING + or ­. THEATRE ?/1 SYSTEM STANDBY TV BD DVD SAT SOUND FIELD VIDEO TUNER/BAND DMPORT BD/DVD TOP MENU MENU F1 A/B F2 ANALOG DIGITAL TUNER/ BAND If an FM program is noisy If an FM program is noisy, you can select monaural reception. There will be no stereo effect, but reception will improve. Tuner Functions 1 4 7 CLEAR DISPLAY 2 5 8 0 3 TONE 6 NIGHT MODE 9 AMP MENU ENTER TOOLS/ OPTIONS 1 2 3 MENU Press MENU. Press X/x repeatedly until "FM Mode?" appears in the top panel display, then press or c. Press X/x to select "MONO. " DISPLAY C, X, x, c, F G f MENU/HOME RETURN/EXIT TV CH TV CH + PRESET PRESET + < < . > g PRESET ­/+ TUNING m TV X H TUNING + M The default setting is underlined. · MONO: monaural reception. x TUNING ­/+ 4 5 Tip Press . Press MENU. 1 Press TUNER/BAND. The last received station is tuned in. You can change "FM" or "AM" by pressing TUNER/BAND. · To improve reception, reorient the supplied antennas (aerials). 2 Press PRESET + or ­ repeatedly to select the preset station. Each time you press the button, the system tunes in one preset station. You can select the preset number directly by pressing the number buttons. 3 Adjust the volume of the system. To turn off the radio Press "/1 to turn off the system, or change to another function. continued 47GB Naming preset stations You can enter a name for preset stations. These names (for example, "XYZ") appear in the top panel display when a station is selected. Note that no more than one name can be entered for each preset station. Tip · You can check the frequency in the top panel display by pressing DISPLAY repeatedly (page 48). 1 Viewing the station name or frequency in the top panel display When the system is set to "FM" or "AM, " you can check the frequency using the top panel display. Press DISPLAY. Press TUNER/BAND. The last received station is tuned in. You can change "FM" or "AM" by pressing TUNER/BAND. 2 3 4 Press PRESET + or ­ repeatedly to select the preset station you want to create an index name for. Press X/x repeatedly until "Name In?" appears in the top panel display. Each time you press DISPLAY, the top panel display changes as shown. 1 Station name* 2 Frequency** * This is displayed if you have entered a name for a preset station. [. . . ] · Change the "RF CHANGE" setting (page 71). · Change the ID settings of the S-AIR main unit and S-AIR sub unit. If the system still does not operate properly after performing the above measures, reset the system as follows: Use buttons on the subwoofer for the operation. 1 2 Press ?/1 to turn on the power. Press INPUT SELECTOR, VOLUME ­, ?/1 at the same time. "COLD RESET" appears and the system is reset. AMP menu, sound field, etc. , return to the default settings. 75GB Specifications Formats supported by this system Digital input formats supported by this system are as follows. Format Supported/Not supported HDMI section Connector Video inputs/outputs HDMI 19pin-standard connector BD, DVD, SAT: 640 × 480p@60 Hz 720 × 480p@59. 94/60 Hz 1440 × 480p@59. 94/60 Hz (pixel sent 2 times) 1280 × 720p@59. 94/60 Hz 1920 × 1080i@59. 94/ 60 Hz 1920 × 1080p@59. 94/ 60 Hz 720 × 576p@50 Hz 1440 × 576p@50 Hz (pixel sent 2 times) 1280 × 720p@50 Hz 1920 × 1080i@50 Hz 1920 × 1080p@50 Hz 1920 × 1080p@24 Hz BD, DVD, SAT: Linear PCM 7. 1ch/ Dolby Digital/ DTS Dolby Digital DTS Linear PCM (2ch)* Linear PCM (5. 1ch, 7. 1ch)* (Only on HDMI) Dolby Digital Plus Dolby True HD DTS-HD a a a a × × × Audio inputs * Linear PCM accepts sampling frequencies of no more than 96 kHz. Tuner section System FM tuner section Tuning range PLL quartz-locked digital synthesizer Amplifier section Power output (rated) Front L / Front R (rated): 35 W + 35 W (at 10 ohms, 1 kHz, 1 % THD) RMS output power (reference) Front L / Front R*: 50 W + 50 W (at 10 ohms, 1 kHz, 10 % THD) Center*: 50 W (at 10 ohms, 1 kHz, 10 % THD) Surround L / Surround R*: 50 W + 50 W (at 10 ohms, 1 kHz, 10 % THD) Subwoofer*: 100 W (at 4 ohms, 70 Hz, 10 % THD) + 100 W (at 4 ohms, 500 Hz, 10 % THD) * Depending on the sound field settings and the source, there may be no sound output. 87. 5 ­ 108. 0 MHz (50 kHz step) Antenna (aerial) FM wire antenna (aerial) Antenna (aerial) terminals 75 ohms, unbalanced Intermediate frequency 10. 7 MHz AM tuner section Tuning range European models: 531 kHz ­ 1, 602 kHz (with the interval set at 9 kHz) Australian models: 531 kHz ­ 1, 710 kHz (with the interval set at 9 kHz) 530 kHz ­ 1, 710 kHz (with the interval set at 10 kHz) Antenna (aerial) AM loop antenna (aerial) Intermediate frequency 450 kHz Video section Input Inputs/Outputs VIDEO: 1 Vp-p 75 ohms COMPONENT: Y: 1 Vp-p 75 ohms Inputs (Analog) VIDEO Inputs (Digital) TV, DVD SAT Sensitivity: 700 mV Impedance: 33 kohms Optical Coaxial, optical PB/CB, PR/CR: 0. 7 Vp-p 75 ohms 76GB Speakers Front/Center/Surround (SS-IS15) Speaker system Speaker unit Rated impedance Dimensions (approx. ) Mass (approx. ) Speaker cords Full range speaker system 35 mm 10 ohms 45 × 55 × 40 mm (w/h/d) 0. 07 kg 4. 5 m × 2, 3 m × 1, 12 m × 2 Glossary Dolby Digital Subwoofer (SA-WIS100) Speaker system Speaker unit Rated impedance Dimensions (approx. ) 2 Way 2 Drivers Subwoofer speaker system 120 mm + 160 mm 4 ohms 238 × 441 × 434 mm (w/h/d) 14. 5 kg 220 ­ 240 V AC, 50/60 Hz Mass (approx. ) Power requirements Power consumption On: 115 W Standby mode: 0. 3W (when "CTRL: HDMI" and "S-AIR STBY" are set to "OFF. ") Power output (DIGITAL MEDIA PORT)DC OUT: 5 V, 700 mA This movie theatre sound format is more advanced than Dolby Surround Pro Logic. [. . . ]