User manual SONY HT-SL40

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not cover the ventilation of the apparatus with newspapers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] 0 ; PRO LOGIC II: "; PRO LOGIC" lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. "; PRO LOGIC II" lights up when Pro Logic II processing ("PLII MOV" or "PLII MUS") is applied (page 20). However, both indicators do not light up if the center and surround speakers are set to "NO", and "A. "RDS" only appears for models of area code CEL, CEK only. By adjusting the surround parameters and the tone characteristics of the front speakers, you can customize the sound fields to suit your particular listening situation. Once you customize a sound field, the changes are stored in the memory indefinitely. You can change a customized sound field any time by making new adjustments to the parameters. See the tables on back page for the parameters available in each sound field. To get the most from multi channel surround sound Position your speakers and do the procedures described in "Multi channel surround setup" starting from page 14 before you customize a sound field. Lets you adjust the balance between front left and right speakers. Lets you adjust the level of the center speaker. The LEVEL menu contains parameters that let you adjust the balance and volumes of each speaker. You can also customize various aspects of current sound field. The setting are applied to all sound field except for EFCT. Parameter, the settings are stored individually for each sound field. Lets you adjust the level of the surround left speaker. Lets you adjust the level of the surround right speaker. Lets you adjust the level of the sub woofer. Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. To reproduce the sound track with no compression, select "OFF". â· To reproduce the sound track with the dynamic range intended by the recording engineer, select "STD". [. . . ] â· Make sure you select the correct input selector on the remote. â· If the remote is set to operate the TV only, use the remote to select a source or component other than TV before operating the receiver or other component. Contact the radio station and find out whether they actually provide the service in question. If so, the service may be temporarily out of order. [. . . ]