User manual SONY HT-SL7

[. . . ] To prevent fire or shock hazard, do not expose the unit to rain or moisture. To prevent fire, do not Cover the ventilation of the apparatus with news papers, table-cloths, curtains, etc. and don't place lighted candles on the apparatus. To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus. [. . . ] You can identify the encoding format of program software by looking at its packaging. Dolby Digital discs are labeled with the logo, and Dolby Surround encoded programs are labeled with the logo. Use the buttons on the remote to operate the following modes. Uses 3D sound imaging to create an array of virtual surround speakers positioned higher than the listener from a single pair of actual surround speakers. Automatically detects the type of audio signal being input (Dolby Digital, DTS, or standard 2 channel stereo) and performs the proper decoding if necessary. This mode presents the sound as it was recorded/encoded, without adding any effects (ex. Uses 3D sound imaging to create virtual surround speakers from the sound of the front speakers without using actual surround speakers. Outputs the sound from the front left and right speakers only. Standard 2 channel (stereo) sources completely bypass the sound field processing. No sound is output from the sub woofer when you select NORM. To listen to 2 channel (stereo) sources using the front left and right speakers and a sub woofer, select "A. , internal sound processor will automatically redirect bass sound to subwoofer. Obtains maximum audio impact from video game software. * "VIRTUAL" sound field: Sound field with virtual speakers. The effects provided by the virtual speakers may cause increased noise in the playback signal. When listening with sound fields that employ the virtual speakers, you will not be able to hear any sound coming directly from the surround speakers. 2 PRO LOGIC: Lights up when the receiver applies Pro Logic processing to 2 channel signals in order to output the center and surround channel signals. However, this indicator does not light if the center and surround speakers are set to "NO", and "A. 3 DTS: Lights up when DTS signals are input. 6 COAX: Lights up when the source signal is a digital signal being input through the COAXIAL terminal. 7 OPT: Lights up when the source signal is a digital signal being input through the OPTICAL terminal. 8 Playback channel indicators: The letters light up to indicate the channels being played back. [. . . ] The tables below show the settings of each button. Activates the sleep function and the duration which the receiver turns off automatically. Under normal conditions, the batteries should last for about 6 months. When the remote no longer operates the receiver, replace all batteries with new ones. [. . . ]