User manual SONY HT-SS1000P

[. . . ] As the main plug is used to disconnect the unit from the mains, connect the unit to an easily accessible AC outlet. Should you notice an abnormality in the unit, disconnect the main plug from the AC outlet immediately. Do not expose batteries or apparatus with batteryinstalled to excessive heat such as sunshine, fire or the like. To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. Disposal of waste batteries (applicable in the European Union and other European countries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shall not be treated as household waste. [. . . ] Press VIDEO1 or VIDEO2. You can also use INPUT SELECTOR on the receiver to select "VIDEO 1" or "VIDEO 2". Enjoying a connected component through DMPORT connection 1 2 Tip Press DMPORT. You can also use INPUT SELECTOR on the receiver to select "DMPORT". Playback Start playback of the connected component. 4 5 1 2 3 4 Change the TV input. For details, refer to the operating instructions of the TV. When listening to MP3 or other compressed music files using a portable audio source, you can enhance the sound. Press SOUND FIELD repeatedly until "P. AUDIO" appears in the display. Play back the tape on the VCR. Enjoying a Super Audio CD/CD Turn on the Super Audio CD player/CD player, then place the disc on the tray. Press SA-CD/CD. You can also use INPUT SELECTOR on the receiver to select "SA-CD/CD". Adjust the volume of the receiver. 31GB Amplifier Operations To return to the previous display Press B. Navigating through menus By using the amplifier menus, you can make various adjustments to customize the receiver. 4 7 CLEAR DISPLAY To exit the menu Press AMP MENU. 5 8 0 6 9 ENTER TOOLS/ OPTIONS SOUND FIELD AMP MENU AMP MENU V/v/B/b, RETURN/EXIT MENU/HOME 1 2 3 4 5 6 7 Press AMP MENU. "SET HDMI" appears on the display. Press V/v repeatedly to select the menu you want. or b to enter the Press V/v repeatedly to select the parameter you want to adjust. Press V/v repeatedly to select the setting you want. Press to enter the setting. 32GB Overview of the menus The following options are available in each menu. For details on navigating through menus, see page 32. Menu [Display] HDMI setting [SET HDMI] (page 35) Parameters [Display] Control for HDMIa)b) [CONTROL FOR HDMI] Volume Limita) [VOL LIM] Power Savea) [P. SAVE] Auto Calibration setting [A. CAL] (page 35) Speaker setting [SP SETUP] (page 36) Auto Calibration starta) [START] Settings CTRL ON, CTRL OFF LIM MAX, LIM 39. . . LIM 1, LIM MIN SAVE ON, SAVE OFF For details, see "Performing Auto Calibration" (page 24). NO CNT Y SUR Y FL 3. 00 m CNT 3. 00 m FR 3. 00 m SR 3. 00 m Initial setting CTRL ON LIM MAX SAVE ON Amplifier Operations Clear Auto Calibration resulta)c) YES, NO [A. CAL CLR] Center speakera) [CNT SP] Surround speakersa) [SUR SP] Front left speaker distancea)d) [FL DIST] Center speaker distancea)d) [CNT DIST] CNT Y, CNT N SUR Y, SUR N FL 0. 00 m to FL 7. 00 m (0. 10 m step) CNT 0. 00 m to CNT 7. 00 m (0. 10 m step) Front right speaker distancea)d) FR 0. 00 m to FR 7. 00 m [FR DIST] (0. 10 m step) Surround right speaker distancea)d) [SR DIST] Surround left speaker distancea)d) [SL DIST] Subwoofer distancea)d) [SW DIST] SR 0. 00 m to SR 7. 00 m (0. 10 m step) SL 0. 00 m to SL 7. 00 m (0. 10 m step) SW 0. 00 m to SW 7. 00 m (0. 10 m step) SL 3. 00 m SW 3. 00 m continued 33GB Menu [Display] Level setting [LEVEL] (page 37) Parameters [Display] Test tonea) [T. TONE] Front left speaker level [FL LVL] Center speaker level [CNT LVL] Front right speaker level [FR LVL] Surround right speaker level [SR LVL] Surround left speaker level [SL LVL] Subwoofer level [SW LVL] Settings T. Select "LEVEL" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 32) and "Overview of the menus" (page 33). Adjusting the tone (TONE menu) You can use the TONE menu to adjust the tonal quality (bass/treble level) of the speakers. Select "TONE" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 32) and "Overview of the menus" (page 33). Amplifier Operations LEVEL menu parameters x T. TONE (Test tone) Lets you adjust the speaker levels while listening to the test tone from your listening position. For details, see "8: Adjusting the speaker levels (TEST TONE)" (page 27). TONE menu parameters x BASS (Bass level) x TREBLE (Treble level) x FL LVL (Front left speaker level) x CNT LVL (Center speaker level) x FR LVL (Front right speaker level) x SR LVL (Surround right speaker level) x SL LVL (Surround left speaker level) x SW LVL (Subwoofer level) Notes · "CNT LVL" does not appear when you set "CNT N" in the "SP SETUP" setting. · "SR LVL" and "SL LVL" do not appear when you set "SUR N" in the "SP SETUP" setting. 37GB Custom settings (CUSTOM menu) You can use the CUSTOM menu to make various settings to suit your preference. Select "CUSTOM" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 32) and "Overview of the menus" (page 33). x AUD. DRC (Audio dynamic range compression) Lets you compress the dynamic range of the sound track. This may be useful when you want to watch movies at low volumes late at night. [. . . ] · When the receiver is in standby mode, image and sound are output from the HDMI component selected the last time you turned off the receiver. If you are enjoying other component, play the component and perform the One-Touch Play operation, or turn on the receiver to select the HDMI component you want to enjoy. · Make sure "P. SAVE" is set to "SAVE OFF" in the SET HDMI menu if you connect components not compatible with the "BRAVIA" Sync to the receiver (page 48). The volume turns down when the output method changes from the TV speaker to the speakers connected to the receiver. [. . . ]