User manual SONY HT-SS2300

[. . . ] 3-296-084-12(1) Home Theatre System Operating Instructions HT-SF2300 HT-SS2300 ©2008 Sony Corporation Owner's Record The model and serial numbers are located on the rear of the unit. Record the serial number in the space provided below. Refer to them whenever you call upon your Sony dealer regarding this product. ___________________________________________ ___________ Serial No. [. . . ] Select "2-TONE" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 35) and "Overview of the menus" (page 36). Settings for the surround sound (SUR menu) You can use the SUR menu to select the sound field you want for your listening pleasure. Select "3-SUR" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 35) and "Overview of the menus" (page 36). TONE menu parameters x BASS LVL (Front speaker bass level) x TRE LVL (Front speaker treble level) SUR menu parameters x S. F. SELCT (Sound field selection) Lets you select the sound field you want. For details, see "Enjoying Surround Sound" (page 45). Note The receiver lets you apply the last selected sound field to an input whenever it is selected (Sound Field Link). For example, if you select "HALL" for the SA-CD/CD input, then change to a different input and then return to SA-CD/CD, "HALL" will automatically be applied again. x EFFECT (Effect level) Lets you adjust the "presence" of the surround effect for sound fields selected with the MOVIE or MUSIC button. MAX The surround effect is maximum. 40GB Settings for the tuner (TUNER menu) You can use the TUNER menu to set the FM station receiving mode. Select "4-TUNER" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 35) and "Overview of the menus" (page 36). Settings for the audio (AUDIO menu) You can use the AUDIO menu to make settings for the audio to suit your preference. Select "5-AUDIO" in the amplifier menus. For details on adjusting the parameters, see "Navigating through menus" (page 35) and "Overview of the menus" (page 36). Amplifier Operations TUNER menu parameters x FM MODE (FM station receiving mode) · FM MONO This receiver will decode the signal as mono signal regardless of the broadcast signal. · FM AUTO This receiver will decode the signal as stereo signal when the radio station is broadcast in stereo. AUDIO menu parameters x DEC. (Digital audio input decoding priority) Lets you specify the input mode for the digital signal input to the DIGITAL IN and HDMI IN jacks. PCM When signals from the DIGITAL IN jack are selected, PCM signals are given priority (to prevent interruption when playback starts). However, when other signals are input, there may be no sound depending on the format. When signals from the HDMI IN jack are selected, only PCM signals are output from the connected player. When signals in other format are received, set to "DEC. AUTO Automatically switches the input mode between DTS, Dolby Digital, or PCM. AUTO" and the sound from the digital audio jacks (for CD, etc. ) is interrupted when playback starts, set to "DEC. PCM". continued 41GB x DUAL (Digital broadcast language selection) Lets you select the language you want to listen to during digital broadcast. [. . . ] · Select a stronger FM station. Additional Information continued 69GB The RDS information that you want does not appear. a) · Contact the radio station and find out whether they actually provide the service in question. If so, the service may be temporarily out of order. a) Models If you are unable to remedy the problem using the troubleshooting guide Clearing the receiver's memory may remedy the problem (page 25). However, note that all memorized settings will be reset to their factory settings and you will have to readjust all settings on the receiver. of area code CEL, CEK only. If the problem persist Remote control The remote does not function. · For receiver operation, you can only use the DISPLAY button when the TUNER input is selected. [. . . ]