User manual SONY HT-V2000DP

[. . . ] 3-091-712-12 (1) US DVD Player/ Video Cassette Recorder Operating Instructions For customers in the USA If you have any questions about your Sony DVD-VCR, you may call Sony Customer Information Services Company at 1-800-VHS-SONY (847-7669). For all other Sony product questions, please call Sony Customer Information Services Company at 1-800-222-SONY (7669). Or write to: Sony Customer Information Services Company 12451 Gateway Boulevard Ft. Myers, FL 33913 For Customers in Canada If this product is not working properly, please call 1-877-602-2008 for Peace of Mind Warranty Replacement service. [. . . ] Stop the DVD playback. VCR Plus+ Number buttons Basic Operations V/v/B/b ENTER O RETURN 1 Press VCR Plus+. B Enter VCR PLUS+ code with [0~9] Mode Speed [ --------- ] V [Once] [Auto] Vv ENTER RETURN SET UP 2 Press V/v to select "Enter code. " continued Recording TV programs using the VCR Plus+® system (SLV-D550P only) 55 3 Press the number buttons to enter the PlusCode number. To correct a setting, press B to return to that setting and reset. VCR PLUS+ B Enter code with [0~9] Mode Speed [012345678] V [Once] [Auto] VvB ENTER ~ RETURN SET UP 4 5 Press V/v to select "Mode. " Press B/b to select Once, Mo~Fr, or Weekly: To record Only once Everyday Monday to Friday Once a week Select Once Mo~Fr Weekly Enter code with [0~9] B Mode Speed VCR PLUS+ [012345678] [Once] [Auto] V v B b ENTER RETURN SET UP 6 Press V/v to select "Speed. " Enter code with [0~9] Mode B Speed VCR PLUS+ [012345678] [Once] [Auto] V v B b ENTER RETURN SET UP 7 Press B/b to select the tape speed, Auto, SP, or EP, then press ENTER. CH START END DATE SPEED 0 2 0 7 1 0 PM 0 9 1 0PM 1 2 / 0 5 Auto VvBb RETURN CLEAR 8 9 To enter another setting, repeat steps 1 to 7. The timer indicator appears in the display window and the VCR stands by for recording. When using a cable box, leave it on. 56 Recording TV programs using the VCR Plus+® system (SLV-D550P only) To stop recording To stop the VCR while recording, press x STOP. To use the DVD-VCR after setting the timer To use the DVD-VCR before a timer recording begins, just press ?/1. The timer indicator disappears from the display window and the DVD-VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: · · · · Reset the counter (page 43). Display tape information on the TV screen (page 45). Watch another TV program (page 46). Tip · To check, change or cancel the program setting, see "Checking/changing/canceling timer settings" on page 58. Notes · If the VCR does not accept the PlusCode number, this means that: ­ The PlusCode number is incorrect. ­ Once, Mo~Fr, or Weekly was selected incorrectly. You cannot select MO~FR or Weekly for a program that airs more than seven days ahead. Correctly set the PlusCode number again from step 2. · When the PlusCode number is incorrect, "Invalid code" will appear in the display. Recording TV programs using the VCR Plus+® system (SLV-D550P only) 57 Basic Operations Checking/changing/canceling timer settings Before you start. . . · Check that the DVD-VCR clock is set to the correct time. · Turn on the DVD-VCR and your TV. · Switch the input selector on your TV so that the signal from the player appears on the TV screen. · Set TV / DVD·VIDEO to DVD·VIDEO, then press SELECT VIDEO to control the VCR (page 10). · When using a decoder, turn it on. · Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording time. [. . . ] DVD-RW (page 6) A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. The DVD-RW has two different modes: VR mode and Video mode. DVD-RWs created in Video mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording) mode allow the contents to be programmed or edited. DVD+RW (page 6) A DVD+RW (plus RW) is a recordable and rewritable disc. [. . . ]